Relationship between shear stress and shear strain of polymer melt under vibrating force field

Abstract

When a sinusoidal vibration was superimposed in parallel on the flow direction of a polymer melt being extruded through a capillary, the shear stress and shear rate of the polymer melt were analysed with a constant velocity type dynamic rheometer of capillary (CVDRC) devised by the authors. By measuring the instantaneous data of capillary entry pressure, capillary volume flux (or absolute velocity of piston rod) and their phase difference in a vibrating force field, it was found that the relationship between the pulsating amplitude value coefficient of entry pressure and that of volumetric flowrate was an approximate power series; the wall shear stress and wall shear rate of low density polyethylene (LDPE) melt extruded dynamically under various amplitudes and frequencies also exhibited a non-linear proportional relationship.

Keywords

VIBRATING FORCE FIELD POLYMER MELT SHEAR STRESS SHEAR RATE

Get full access to this article

View all access options for this article.

References

Ibar

J. P.

: Polym. Eng. Set, 1998, 38, 1–20.

Scon

K. L.

and Giacomin

A. J.

: Polym. Eng. Set, 2000, 40, 509–524.

Dunwoody

: J. Non-Newtonian Fluid Mech., 1996, 65, 195–220.

Liu

Y. M.

, Shaw

M. T.

and Ruminello

W. T.

: Polym Eng. Set, 1998, 38, 169.

Giacomin

A. J.

and Jeyaseelan

R. S.

: Polym. Eng. Set, 1995, 35, 768–777.

Fridman

M. L.

and Peshkovsky

S. L.

: Adv. Polym. Set, 1993, 28, 43–79.

Kwon

and Leonov

A. I.

: RheoL Acta, 1993, 32, 108–112.

Wong

C. M.

and Chen

C. H.

: Polym. Eng. Set, 1990, 30, 1574–1584.

Goshawk

J. A.

and Waters

N. D.

: J. Non-Newtonian Fluid Meek, 1994, 54, 449–464.

10.

Liu

Y. J.

and Qu

J. P.

: China Plast., 2001, (9), 12–15.

11.

J. P.

and Liu

Y. J.

: China Plast. Ind., 2000, (6), 21–24.

12.

J. P.

and Xu

B. P.

: Plast. Rubber Compos., 2002, 31, 432–435.

13.

J. P.

: Polym.-Plast. Technol. Eng (PPTE), 2002, 41, 115–132.

14.

Han

C. D.

: ‘Rheology in polymer processing’: 1976, New York, Academic Press.

15.

Tanner

: ‘Engineering rheology’; 1984, Oxford University Press.

16.

Liu

Y. J.

: Dissertation, South China University of Technology, 2002.

17.

Liu

Y. J.

and Qu

J. P.

: J. Vibration Shock, 2004, 23, 55–58.