Abstract
Melt temperature is an important parameter in the melt processing of polymers. However, it is not possible to control melt temperature directly, only to influence it using processing parameters such as processing temperature settings. It is therefore important to know the influence of controllable process parameters on melt temperature. In this work, the relationships between controllable process parameters and melt temperature have been investigated for a 50 mm S + B single screw extruder. The extruder was equipped with a thermocouple mesh at the die inlet to determine melt temperature. It was found that melt pressure, die size, feed section barrel temperature, and compression section barrel temperature had a negligible effect on the melt temperature profiles generated, while increasing the screw speed resulted in higher melt temperatures. The metering section barrel temperature had a significant effect on melt temperature, thermal conduction effects being more important than shear heating effects. Equipment wall temperatures, downstream of the screw, produced changes in the melt temperature in the melt located within 7 mm of the wall. It was found that melt temperatures can be significantly different from those set on the equipment.
Get full access to this article
View all access options for this article.