The brazeability of AZ31B–H24 magnesium alloy sheet to Zn electroplated, plain carbon steel sheet using an Mg–Al–Zn alloy filler metal and a diode laser heat source has been investigated. While the Zn coating promoted good wetting between the molten filler alloy and the steel sheet, it did not play a direct role in forming the final bond. Bonding between the magnesium alloy and the steel was facilitated by the formation of two transition layers. First, a nanoscale layer of FeAl3 phase formed on the surface of the steel by diffusion of Al from the Mg–Al–Zn brazing alloy into the steel. Upon further cooling, nucleation and growth of either α-Mg+MgZn eutectic phases or Mg2(Al,Zn)3 phase occurred on the FeAl3 surface layer.
LiuL: ‘Welding and joining of magnesium alloys’, 1st edn; 2005, Cambridge, Woodhead Publishing Ltd.
2.
LiuL and QiX: ‘Strengthening effect of nickel and copper interlayers on hybrid laser-TIG welded between magnesium alloy and mild steel’, Mater. Des., 2010, 31, (8), 3960–3963.
3.
ZhaoX, SongG and LiuL: ‘Microstructure of dissimilar metal joint with magnesium alloy AZ31B and steel 304 for laser-tungsten inert gas lap welding’, Trans. Chin. Weld. Inst., 2006, 27, 56–62.
4.
LiuLM and QiX: ‘Effects of copper addition on microstructure and strength of the hybrid laser-TIG welded joints between magnesium alloy and mild steel’, J. Mater. Sci., 2009, 44, 5725–5731.
5.
LiyangeT, KilbourneJ and GerlichAP: ‘Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds’, Sci. Technol. Weld. Joining, 2009, 14, (6), 500–508.
6.
JanaS, HovanskiY and GrantGJ: ‘Friction stir lap welding of magnesium alloy to steel: a preliminary investigation’, Metall. Mater. Trans. A, 2010, 41A, (12), 3173–3182.
7.
LiuL, XiaoL, FengJC, TianYH, ZhouSQ and ZhouY: ‘The mechanism of resistance spot welding of magnesium to steel’, Metall. Mater. Trans. A, 2010, 41A, (10), 2651–2661.
8.
NasiriAM, LiL, KimSH, ZhouY, WeckmanDC and NguyenTC: ‘Microstructure and properties of laser brazed magnesium to coated steel’, Weld. J., 2011, 90, (11), 211s–219s.
9.
NasiriAM, WeckmanDC and ZhouY: ‘Interfacial microstructure of diode laser brazed AZ31B magnesium to steel sheet using a nickel interlayer’, Weld. J., 2013, 92, (1), 1s–10s.
10.
NasiriAM, WeckmanDC and ZhouY: ‘The effect of a Sn interlayer on brazebility of AZ31B magnesium to steel sheet’, 2014, to be published.
11.
TanCW, ChenYB, LiLQ and GuoW: ‘Comparative study of microstructure and mechanical properties of laser welded-brazed Mg/steel joints with four different coating surfaces’, Sci. Technol. Weld. Joining, 2013, 18, (6), 466–472.
12.
LiL, TanC, ChenY, GuoW and MeiC: ‘CO2 laser welding-brazing characteristics of dissimilar metals AZ31B Mg alloy to Zn coated dual phase steel with Mg based filler’, J. Mater. Process. Technol., 2013, 213, 361–375.
13.
LiL, TanC, ChenY, GuoW and SongF: ‘Comparative study of microstructure and mechanical properties of laser welded-brazed Mg/mild steel and Mg/stainless steel joints’, Mater. Des., 2013, 43, 59–65.
Vander VoortGF: ‘Metallography principles and practice’; 1999, Materials Park, OH, ASM International.
16.
SchwartzMM: ‘Brazing’; 1987, Materials Park, OH, ASM International.
17.
LiL, TanCW, ChenY, GuoW and HuX: ‘Influence of Zn coating on interfacial reactions and mechanical properties during laser welding-brazing of Mg to steel’, Metall. Mater. Trans. A, 2012, 43A, (12), 4740–4754.
18.
PearsonWB: ‘Lattice spacings and structures of metals and alloys’; 1958, New York, Pergamon Press.
19.
PerrotP, TissierJC and DauphinJY: ‘Stable and metastable equilibria in the Fe-Zn-Al system at 450°C’, Z. Metallkd., 1992, 83, (11), 786–790.
20.
NiknejadST, LiuL, NguyenT, LeeMY, EsmaeiliS and ZhouY: ‘Effects of heat treatment on grain-boundary β-Mg17Al12 and fracture properties of resistance spot-welded AZ80 Mg alloy’, Metall. Mater. Trans. A, 2013, 44A, (8), 3747–3756.
