With the aim to increase base material creep strength and overcome the type IV cracking problem, a new design concept was developed. This so called martensitic boron–nitrogen strengthened steel (MARBN) combines boron strengthening through solid solution with precipitation strengthening by finely dispersed nitrides. In this work, uniaxial creep tests of the MARBN base material and welded joints have been carried out. The creep strength of the welded joints was analysed, and the evolution of creep damage was investigated. The creep tests of MARBN revealed increased strength of the base material of about +20% compared to the best commercially available 9Cr steel grade. At higher stress levels, the creep strength of crosswelds is between that of the MARBN base material and the conventional 9Cr base materials. Nevertheless, long term creep tests revealed a drop in creep strength of the MARBN welded joints. The underlying phenomena of crossweld creep behaviour are discussed in detail.
BirolF: ‘World energy outlook 2010’, Int. Energy Agency, 2010.
2.
CerjakH: ‘The role of welding in the power generation industry’, Proc. IIW Int. Conf. on ‘Safety reliability of welded components in energy and processing industry’, Graz, Austria, 2008, Verlag der Technischen Universität Graz,17–27.
FrancisJA, MazurW and BhadeshiaHKDH: ‘Review type IV cracking in ferritic power plant steels’, Mater. Sci. Technol., 2006, 22, (12), 1387–1395.
5.
AbeF: ‘Effect of boron on creep deformation behavior and microstructure evolution in 9% Cr steel at 650°C’, Int. J. Mater. Res., 2008, 99, 2–9.
6.
AbeF, TabuchiM, KondoM and TsukamotoS: ‘Suppression of type IV fracture and improvement of creep strength of 9Cr steel welded joints by boron addition’, Int. J. Press. Vessels Pip., 2007, 84, (1–2), 44–52.
7.
MasuyamaF: ‘Alloy development and material issues with increasing steam temperature’, Proc. 4th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Hilton Head Island, SC, USA, 2004, ASM International,35–50.
8.
DavidSA, SiefertJA and FengZ: ‘Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants’, Sci. Technol. Weld. Joining, 2013, 18, (8), 631–651.
9.
AbsonDJ and RothwellJS: ‘Review of type IV cracking of weldments in 9–12%Cr creep strength enhanced ferritic steels’, Int. Mater. Rev., 2013, 58, (8), 437–473.
10.
AbeF, TabuchiM and TsukamotoS: ‘Mechanisms for boron effect on microstructure and creep strength of ferritic power plant steels’, Energy Mater., 2012, 4, (4), 166–174.
11.
AbeF, TabuchiM, TsukamotoS and ShiraneT: ‘Microstructure evolution in HAZ and suppression of Type IV fracture in advanced ferritic power plant steels’, Int. J. Press. Vessels Pip., 2010, 87, (11), 598–604.
12.
KondoM, TabuchiM, TsukamotoS, YinF and AbeF: ‘Suppressing type IV failure via modification of heat affected zone microstructures using high boron content in 9Cr heat resistant steel welded joints’, Sci. Technol. Weld. Joining, 2006, 11, (2), 216–223.
13.
AlbertSK, KondoM and TabuchiM: ‘Improving the creep properties of 9Cr-3W-3Co-NbV steels and their weld joints by the addition of boron’, Metall. Mater. Trans. A, 2005, 36A, (2), 333–343.
14.
MayrP: ‘Evolution of microstructure and mechanical properties of the heat affected zone in B-containing 9% chromium steels’, Doctoral thesis, Graz University of Technology, Graz, Austria, 2007.
15.
MayrP, SchlacherC and MitscheS: ‘Critical issues with creep-exposed ferritic-martensitic welded joints for thermal power plants’, Proc. IIW Int. Conf. on ‘Global trends in joining, cutting and surfacing technology’, Chennai, India, 2011, Alpha Science Intl Ltd., 417–425.
16.
MayrP, HolzerI and Mendez-MartinF: ‘Experience with 9Cr3W3CoVNbBN base material and crosswelds at 650 C for implementation in USC power plants’, Proc. 3rd Symp. on ‘Heat resisting steels and alloys for high efficiency USC power plants’, Tsukuba, Japan, 2009, NIMS.
17.
HoriuchiT, IgarashiM and AbeF: ‘Improved utilization of added B in 9Cr heat-resistant steels containing W’, ISIJ Int., 2002, 42, 67–71.
18.
AbeF, HoriuchiT, TaneikeM and SawadaK: ‘Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperature’, Mater. Sci. Eng. A, 2004, A378, (1–2), 299–303.
19.
TabuchiM, KondoM, KuboK and AlbertS: ‘Improvement of type IV creep cracking resistance of 9Cr heat resisting steels by boron addition’, OMNI, 2004, 3, (3).
20.
TaneikeM, AbeF and SawadaK: ‘Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions.’, Nature, 2003, 424, (6946), 294–296.
21.
MayrP, Mendez MartinF, AlbuM and CerjakH: ‘Correlation of creep strength and microstructural evolution of a boron alloyed 9Cr3W3CoVNb steel in as-received and welded condition’, Mater. High Temp., 2010, 27, (1), 67–72.
22.
MayrP, HolzerI, Mendez-martinF, AlbuM, MitscheS, GonzálezV and AgüeroA: ‘Improved creep and oxidation behaviour of a martensitic 9Cr steel by the controlled addition of boron and nitrogen’, Proc. 9th Liège Conf. on ‘Materials for advanced power engineering’, Leige, Belgium, 2010, Schiften des Forschungszentrum Julich,350–361.
23.
SakurayaK, OkadaH and AbeF: ‘BN type inclusions formed in high Cr ferritic heat resistant steel’, Energy Mater., 2006, 1, (3), 158–166.
24.
SchlacherC, SommitschC, BaumgartnerS and MayrP: ‘Creep and damage investiagtions of advanced martensitic chromium steel weldments for high temperature application in thermal power plants’, ECCC Int. Conf. on ‘Creep and fracture in high temperature components: design & life assessment issues’, Rome, Italy, 2014, to be published.
25.
ShiraneT, TsukamotoS, TsuzakiK, AdachiY, HanamuraT, ShimizuM and AbeF: ‘Ferrite to austenite reverse transformation process in B containing 9%Cr heat resistant steel HAZ’, Sci. Technol. Weld. Joining, 2009, 14, (8), 698–707.
26.
TsukamotoS, LiuY, ShiraneT, TabuchiM and AbeF: ‘Improvement of microstructure stability during creep in high Cr ferritic heat resistant steel HAZ mechanism of type IV failure’, (ed. DebRoyT, DavidS A, DuPontJ, KosekiT and BhadeshiaH K D H), Proc. 9th Int. Conf. on ‘Trends in welding research’, Chicago, IL, USA, 2013, ASM International, 1–10.
27.
SchlacherC, SommitschC, GuptaC, TodaH, UesugiK, SuzukiY and MayrP: ‘Creep and damage investigation of improved 9% Cr steel welded joints’, (ed. DebRoyT, DavidS A, DuPontJ, KosekiT and BhadeshiaH K D H), Proc. 9th Int. Conf. on ‘Trends in welding research’, Chicago, IL, USA, 2013, ASM International, 376–381.
28.
SchlacherC, BéalC, SommitschC, TodaH and MayrP: ‘Study of creep damage in creep exposed martensitic high chromium steel weldments’, (ed. GandyD and ShingledeckerJ), Proc. 7th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Hawaii, USA, 2014, ASM International, 914–922.
29.
SchlacherC, PelzmannT, BéalC, SommitschC, GuptaC, TodaH and MayrP: ‘Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro tomography and EBSD’, Mater. Sci. Technol., 2014, to be published.
30.
LahaK, ChandravathiKS, ParameswaranP, GoyalS and MathewMD: ‘A comparison of creep rupture strength of ferritic/austenitic dissimilar weld joints of different grades of Cr-Mo ferritic steels’, Metall. Mater. Trans. A, 2011, 43A, (4), 1174–1186.
31.
AbeF: ‘Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants’, Sci. Technol. Adv. Mater., 2008, 9, (1).
32.
AbeF: ‘Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr–W steels’, Mater. Sci. Eng. A, 2004, A387–A389, 565–569.
33.
TakeuchiS and ArgonAS: ‘Steady-state creep of single-phase crystalline matter at high temperature’, J. Mater. Sci., 1976, 11, (8), 1542–1566.
34.
Verband der TÜV: ‘VdTÜV-Werkstoffblatt 552/2: Warmfester Stahl X10CrWMoVNb9-2’, 2005.
35.
European Creep Collaborative Committee: ‘ECCC data sheets 2005’; 2005, United Kingdom, European Technology Development.
36.
National Institute for Materials Science: ‘NIMS creep data sheet no. 48A’; 2012, Tsukuba, Japan, National Institute for Materials Science.
37.
AbeF, TabuchiM, TsukamotoS and LiuY: ‘Alloy design of tempered martensitic 9Cr-boron steel for A-USC boilers’, (ed. GandyD and ShingledeckerJ), Proc. 7th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Hawaii, USA, 2014, ASM International, 1127–1138.
