The effects of inadequate shoulder contact and poor gas shielding were examined in friction stir welds of ATI 425 titanium. Welds with varying oxidation induced surface discolorations due to poor gas shielding and varying amounts of shoulder contact were studied to determine the effects of these parameters on the microstructure, microhardness, and three-point bend test properties of the welds. The effects of these parameters and their effects on the mechanical properties of the resultant weld are discussed.
Thomas,W. M., Nicholas,E. D., Needham,J. C., Murch,M. G., Temple-Smith,P. and Dawes,C. J.: GB Patent application no. 9125978·8, 1991; US Patent no. 5460317, 1995.
3.
Mishra,R. S. and Mahoney,M. W.: ‘Friction stir welding and processing’; 2007, Materials Park, OH, ASM International.
4.
Fonda,R. W., Reynolds,A. P., Feng,C. R., Knipling,K. E. and Rowenhorst,D. J.: ‘Material flow in friction stir welds’, Metall. Mater. Trans. A, 2013, 44A, 337–344.
5.
VanderVoort,G.: ‘Metallographic preparation of titanium and its alloys’, Buehler Tech-Notes, Vol. 3, Iss 3, 1999. B. Taylor and E. Weidmann: ‘Metallographic preparation of titanium’, Struers Application Note, 2008.
6.
Leinert,T. J., Jata,K. V., Wheeler,R. and Seetharaman,V.: ‘Friction stir welding of Ti-6Al-4V alloys’, Proc. Conf. on ‘Joining of advanced and specialty materials’; 2000, Materials Park, OH, ASM International.
7.
Ramirez,A. J. and Juhas,M. C.: ‘Microstructural evolution in Ti-6Al-4V friction stir welds’, Mater. Sci. Forum, 2003, 426–432, 2999–3004.
8.
Zhang,Y., Sato,Y. S., Kokawa,H., Park,S. H. C. and Hirano,S.: ‘Microstructural characteristics and mechanical properties of Ti-6Al-4V friction stir welds’, Mater. Sci. Eng. A, 2008, A485, (1–2), 448–455.
9.
Zhou,L., Liu,H. J. and Liu,Q. W.: ‘Effect of rotation speed on microstructure and mechanical properties of Ti-6Al-4V friction stir welded joints’, Mater. Des., 2010, 31, (5), 2631–2636.
10.
Lutjering,G. and Williams,J. C.: ‘Titanium’, 35; 2003, Berlin, Springer-Verlag.
11.
Dieter,G. E.: ‘Mechanical metallurgy’, 3rd edn, 659–660; 1986, New York, McGraw-Hill.
