The microtexture features of Nd:YAG laser welded joints in 5A90 aluminium–lithium (Al–Li) alloys were examined using electron back scattered diffraction (EBSD). Microtexture was determined by means of the grain orientation image maps (OIM), pole figures (PF), misorientation angles and orientation distribution function (ODF) of the weld metal (WM), heat affected zone (HAZ) and unaffected base metal (BM) of the welded joint. The results show that there is a change of microtexture in the WM and HAZ of the welded joint in terms of the component and intensity of the texture. The HAZ of the welded joint inherits the texture characteristics of the BM, whereas the welding heat input has an important influence on the component C {112}<111>. The WM of the welded joint is composed of predominantly equiaxed grains with a random microtexture.
SundaresanS, Janaki RamGD, MurugesanR, ViswanathanN: ‘Combined effect of inoculation and magnetic are oscillation on microstructure and tensile behaviour of type 2090 Al-Li alloy weld fusion zones’, Sci. Technol. Weld. Join., 2000, 5, 257–264.
HectorLG, ChenY.-L, AgarwalS, BriantCL: ‘Texture characterization of autogenous Nd:YAG laser welds in AA5182-O and AA6111-T4 aluminum alloys’, Metall. Mater. Trans. A, 2004, 35A, 3032–3038.
4.
PengY, FuZY, WangWM, ZhangJY, WangYC, WangH, ZhangQJ</surname></author>: ‘Phase transformation at the interface during joining of an Al-Mg-Li alloy by pulsed current heating’, Scr. Mater., 2008, 58, 49–52.
5.
PadmanabhamG, PandeyS, SchaperM: ‘Pulsed gas metal arc welding of Al-Cu-Li alloy’, Sci. Technol. Weld. Join., 2005, 10, 67–75.
6.
SolorzanoIG, DarwishFA, de MacedoMC, de MenezesSO: ‘Effect of weld metal microstructure on the monotonic and cyclic mechanical behavior of tig welded 2091 Al-Li alloy joints’, Mater. Sci. Eng. A, 2003, A348, 251–261.
7.
LinDC, WangGX, SrivatsanTS: ‘A mechanism for the formation of equiaxed grains in welds of aluminum-lithium alloy 2090’, Mater. Sci. Eng. A, 2003, A351, 304–309.
8.
DevS, MurtyBS, RaoKP: ‘Effects of base and filler chemistry and weld techniques on equiaxed zone formation in Al–Zn–Mg alloy welds’, Sci. Technol. Weld. Join., 2008, 13, 598–606.
9.
ZhaoH, WhiteDR, DebRoyT: ‘Current issues and problems in laser welding of automotive aluminum alloys’, Int. Mater. Rev., 1999, 44, 238–265.
10.
ShiYW, ZhongF, LiXY, GongSL, ChenL: ‘Effect of laser beam welding on tear toughness of a 1420 aluminum alloy thin sheet’, Mater. Sci. Eng. A, 2007, A465, 153–159.
11.
MolianAP, SrivatsanTS: ‘Weldability of aluminum-lithium alloy 2090 using laser welding’, J. Mater. Sci., 1990, 25, 3347–3358.
12.
SheikhiM, GhainiFM, TorkamanyMJ, SabbaghzadehJ: ‘Characterisation of solidification cracking in pulsed Nd:YAG laser welding of 2024 aluminium alloy’, Sci. Technol. Weld. Join., 2009, 14, 161–165.
13.
DuanAQ, ChenL, GuoL: ‘Characteristics of vapor/plasmas during YAG laser welding of 5A90 Al-Li alloy’, Rare Metal Mater. Eng., 2009, 38, 160–164.
14.
ChenL, XuWW, GongSL: ‘The effect of weld size on joint mechanical properties of 5A90Al-Li alloy’, Adv. Mater. Res., 2011, 146–147, 1831–1838.
15.
XuF, ChenL, LiSG, LiXY, YangJ: ‘Microstructure and mechanical properties of Al–Li alloy by laser welding with filler wire’, Rare Met. Mater. Eng., 2011, 40, 1775–1779.
16.
YangJ, LiXY, GongSL, ChenL, XuF: ‘Characteristics of aluminum-lithium alloy joint formed by YAG-MIG hybrid welding’, Trans. China Weld. Inst., 2010, 31, 83–86.
17.
CuiL, LiXY, HeDY, ChenL, GongSL: ‘Effect of Nd:YAG laser welding on microstructure and hardness of an Al–Li based alloy’, Mater. Charact., 2012, 71, 95–102.
18.
ZhangY, BabuSS, ZhangP, KenikEA, DaehnGS: ‘Microstructure characterisation of magnetic pulse welded AA6061-T6 by electron backscattered diffraction’, Sci. Technol. Weld. Join., 2008, 13, 467–471.
19.
Gourgues-LorenzonAF: ‘Application of electron back scatter diffraction to the study of phase transformations’, Int. Mater. Rev., 2007, 52, 65–128.
20.
FondaRW, KniplingKE: ‘Texture development in friction stir welds’, Sci. Technol. Weld. Join., 2011, 16, 288–294.
21.
FujimotoM, KogaS, AbeN, SatoYS, KokawaH: ‘Microstructural analysis of stir zone of Al alloy produced by friction stir spot welding’Sci. Technol. Weld. Join., 2008, 13, 663–670.
22.
SuhuddinUFHR, MironovS, SatoYS, KokawaH: ‘Grain structure and texture evolution during friction stir welding of thin 6016 aluminum alloy sheets’, Mater. Sci. Eng. A, 2010, A527, 1962–1969.
23.
SteuwerA, DumontM, AltenkirchJ, BiroscaS, DeschampsA, PrangnellPB, WithersPJ: ‘A combined approach to microstructure mapping of an Al-Li AA2199 friction stir weld’, Acta Mater., 2011, 59, 3002–3011.
24.
RandleV: ‘Applications of electron back scatter diffraction to materials science- status in 2009’, J. Mater. Sci., 2009, 44, 4211–4218.
25.
HuJ, LinDL: ‘Microstructural evolution of superplasticity in large-grained Ni–48Al intermetallics’, Mater. Sci. Eng. A, 2004, A371, 113–118.
26.
WangW, HelbertA.-L, Baudin et alT: ‘Reinforcement of the Cube texture during recrystallization of a 1050 aluminum alloy partially recrystallized and 10% cold-rolled’, Mater. Charact., 2012, 64, 1–7.
27.
YuL, NakataK, YamamotoN, LiaoJ: ‘Texture and its effect on mechanical properties in fiber laser weld of a fine-grained Mg alloy’, Mater. Lett., 2009, 63, 870–872.
28.
SidorJ, MirouxA, PetrovR, KestensL: ‘Microstructural and crystallographic aspects of conventional and asymmetric rolling processes’, Acta Mater., 2008, 56, 2495–2507.
29.
EnglerO, HirschJ, LückeK: ‘Texture development in Al 1·8 wt% Cu depending on the precipitation state’, Acta Metall., 1989, 37, 2743–2753.
30.
SidorJJ, PetrovRH, KestensLAI: ‘Microstructural and texture changes in severely deformed aluminum alloys’, Mater. Charact., 2011, 62, 228–236.
31.
GustafssonM, ThuvanderM, BergqvistE.-L, KeehanE, KarlssonL: ‘Effect of welding procedure on texture and strength of nickel based weld metal’, Sci. Technol. Weld. Join., 2007, 12, 549–555.
