The present study was focused on detecting weld defects in dissimilar joints made by friction stir welding. Radiography test and optical microscopy were used to evaluate the main defects. Coarse and continuous fragments of brass in aluminium matrix, tunnelling and void defects in vicinity of fragments were the main observed defects.
ThomasWM: International patent application no. PCT/GB92/02203 and GB patent application no. 9125978·8, 6(1991), US patent no. 5, 460,317.
2.
RobsonJD, KampN, SullivanA: ‘Microstructural modelling for friction stir welding of aluminium alloys’, Mater. Manuf. Process., 2007, 22, (4), 450–456.
3.
ElangovanK, BalasubramanianV, ValliappanM: ‘Effect of tool pin profile and tool rotational speed on mechanical properties of friction stir welded AA6061 aluminium alloy’, Mater. Manuf. Process., 2008, 23, (3), 251–260.
4.
KimWKyong, GooBC, WonST: ‘Optimal design of friction stir welding process to improve tensile force of the joint of A6005 extrusion’, Mater. Manuf. Process., 2010, 25, (7), 637–643.
5.
BehnaghRAbdi, GiviMKBesharati, AkbariM: ‘Mechanical properties, corrosion resistance and microstructural changes during friction stir processing of 5083 aluminum rolled plates’, Mater. Manuf. Process., 2012, 27, 636–640.
6.
SureshaCN, RajaprakashBM, UpadhyaSA: ‘Study of the effect of tool pin profiles on tensile strength of welded joints produced using friction stir welding process’, Mater. Manuf. Process., 2011, 26, (9), 1111–1116.
7.
AissaniM, GachiS, BoubeniderF, BenkeddaY: ‘Design and optimization of friction stir welding tool’, Mater. Manuf. Process., 2010, 25, (11), 1199–1205.
LeeWB, JungSB: ‘The joint properties of copper by friction stir welding’, Mater. Lett., 2004, 58, 1041–1046.
11.
XieGM, MaZY, GengL: ‘Development of a fine-grained microstructure and the properties of a nugget zone in friction stir welded pure copper’, Scr. Mater., 2007, 57, 73–76.
12.
ParkHS, KimuraT, MurakamiT, NaganoY, NakataK, UshioM: ‘Microstructures and mechanical properties of friction stir welds of 60% Cu–40% Zn copper alloy’, Mater. Sci. Eng. A, 2004, A371, 160–169.
ÇamG, SerindagHT, ÇakanA, MistikogluS, YavuzH: ‘The effect of weld parameters on friction stir welding of brass plates’, Mat.-wiss. u. Werkstofftech, 2008, 39, (6), 394–399.
15.
MeranC: ‘The joint properties of brass plates by friction stir welding’, Mater. Des., 2006, 27, 719–726.
16.
XueP, XiaoBL, NiDR, MaZY: ‘Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds’, Mater. Sci. Eng. A, 2010, A527, 5723–5727-.
17.
UzunH, DonneCD, ArgagnottoA, GhidiniT, GambaroC:’ Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel’, Mater. Des., 2005, 26, 41–46.
18.
WatanabeT, TakayamaH, YanagisawaA: ‘Joining of aluminum alloy to steel by friction stir welding’, J. Mater. Process. Technol., 2006, 178, 342–349.
19.
DresslerU, BiallasG, MercadoUA: ‘Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3’, Mater. Sci. Eng. A, 2009, A256, 113–117.
20.
ChenYC, NakataK: ‘Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys’, Mater. Des., 2009, 30, 469–474.
21.
NajafabadiMFazel, BozorgSFKashani, HanzakiAZarei: ‘Joining of CP-Ti to 304 stainless steel using friction stir welding technique’, Mater. Des., 2010, 3, 4800–4807.
22.
EsmaeiliA, Besharati-GiviMK, RajaniHRZarei: ‘A metallurgical and mechanical study on dissimilar friction stir welding of aluminum 1050 to brass (CuZn30)’, Mater. Sci. Eng. A, 2011, 528, 7093–7102.
23.
EsmaeiliA, RajaniHRZarei, SharbatiM, GiviMKBesharati, ShamanianM: ‘The role of rotation speed on intermetallic compounds formation and mechanical behavior of friction stir welded brass/aluminum 1050 couple’, Intermetallics, 2011, 19, 1711–1719.
