A systematic study of the force–displacement curve of the self-piercing riveting (SPR) process and associated sample characterisation have been carried out in this work. Carbon steel sheet with three different thicknesses and steel rivets with three different hardness levels have been used to examine their impact on the force–displacement characteristic curve. The force–displacement curve is segmented into four different stages, which give the signature of the quality of the joint depending on different process variables. This study shows that the force–displacement curve can be used to monitor the quality of the joint within the same process parameters (rivet length and hardness, total stack thickness and die geometry).
KingRP: ‘Analysis and quality monitoring of a self-pierce riveting process’, PhD thesis, University of Hertfordshire, Hertfordshire, UK, 1997.
2.
BlacketS: ‘Self-pierce riveting technology. A joining solution for light metals’, Proc. 1st Int. Light Metals Technology Conf., Brisbane, Qld, Australia, September 2003, 383–388.
3.
VarisJP: ‘The suitability of clinching as a joining method for high-strength structural steel’, J. Mater. Process. Technol., 2003, 132, (1–3), 242–249.
4.
VoelknerW: ‘Present and future developments of metal forming: selected examples’, J. Mater. Process. Technol., 2000, 106, (1–3), 236–242.
LeeC.-J, KimJ.-Y, LeeS.-K, KoD.-C, KimB.-M: ‘Design of mechanical clinching tools for joining of aluminium alloy sheets’, Mater. Des., 2010, 31, (4), 1854–1861.
7.
VarisJ: ‘Economics of clinched joint compared to riveted joint and example of applying calculations to a volume product’, J. Mater. Process. Technol., 2006, 172, (1), 130–138.
8.
VarisJP, LepistoJ: ‘A simple testing-based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters’, Thin Walled Struct., 2003, 41, (8), 691–709.
9.
BarnesTA, PashbyIR: ‘Joining techniques for aluminium spaceframes used in automobiles: Part I – solid and liquid phase welding’, J. Mater. Process. Technol., 2000, 99, (1–3), 62–71.
10.
BarnesTA, PashbyIR: ‘Joining techniques for aluminium spaceframes used in automobiles: Part II – adhesive bonding and mechanical fasteners’, J. Mater. Process. Technol., 2000, 99, (1–3), 72–79.
11.
Jaguar: Jaguar world monthly magazine, January 2006, Kelsey Publishing Ltd.
HaqueR, BeynonJH, DurandetY, KirsteinO, BlacketS: ‘Feasibility of measuring residual stress profile in different self-pierce riveted joints’, Sci. Technol. Weld. Join., 2012, 17, (1), 60–68.
17.
HowardRM, SundaySP: ‘The corrosion performance of steel self-piercing rivets when used with aluminum components’, SAE-831816, SAE International, Warrendale, PA, USA, 1983.
BriskhamP, BlundellN, HanL, HewittR, YoungK: ‘Comparison of self-pierce riveting, resistance spot welding and spot friction joining for aluminium automotive sheet’, 2006-01-0774, SAE International, Warrendale, PA, USA, 2006.
20.
Jaguar: Jaguar world monthly magazine, December 2005, Kelsey Publishing Ltd.
21.
GårdstamJ, MelanderA, PerssonU, SjöströmE, LeijonG, PazienzaL, RitzénR, SchedinE, SorelV, TrinickR: ‘Development of self piercing riveting technology for stainless sheet steels – an executive summary report’, Swedish Institute for Metals Research, Sotckholm, Sweden, 2004.
22.
HeX, PearsonI, YoungK: ‘Self-pierce riveting for sheet materials: state of the art’, J. Mater. Process. Technol., 2008, 199, 27–36.
23.
HoangNH, PorcaroR, LangsethM, HanssenAG: ‘Self-piercing riveting connections using aluminium rivets’, Int. J. Solids Struct., 2010, 47, 427–439.
24.
HouW, MangialardiE, HuSJ, WangPC, MenassaR: ‘Characterization for quality monitoring of a self-piercing riveting process’, Proc. Sheet Metal Welding Conf. XI, Sterling Heights, MI, USA, May 2004, American Welding Society, Paper no 8–3.
25.
CaiW, WangPC, YangW: ‘Assembly dimensional prediction for self-piercing riveted aluminum panels’, Int. J. Mach. Tools Manuf., 2005, 45, 695–704.
26.
AtzeniE, IppolitoR, SettineriL: ‘Experimental and numerical appraisal of self-piercing riveting’, CIRP Ann., 2009, 58, (1), 17–20.
27.
PorcaroR, HanssenAG, LangsethM, AalbergA: ‘Self-piercing riveting process: an experimental and numerical investigation’, J. Mater. Process. Technol., 2006, 171, 10–20.
28.
BouchardPO, LaurentaT, TollierL: ‘Numerical modeling of self-pierce riveting – from riveting process modeling down to structural analysis’, J. Mater. Process. Technol., 2008, 202, 290–300.
29.
CackoR: ‘Review of different material separation criteria in numerical modeling of the self-piercing riveting process – SPR’, Arch. Civil Mech. Eng., 2008, 8, (2), 21–30.
30.
AtzeniE, IppolitoR, SettineriL: ‘Experimental and numerical investigation on self-piercing riveting’, Politecnico di Torino, Turin, Italy, 2010.
