This work investigates the weldability of Inconel 718 using the metal inert gas (MIG) welding process called ‘cold metal transfer’. This arc welding process is reported for working with a lower heat input compared to other arc processes. The consequences are less base metal impaired, low deformation and low residual stress level in assembly. In order to check these abilities, metallographic, texture, chemical and residual stress analyses have been carried out. Results show that MIG cold metal transfer has good properties for the welding of Inconel 718 inasmuch as no defect has been detected and a lower level of residual stresses has been introduced in metal compared to classic MIG.
SimsCT, HagelWC: ‘The superalloys’; 1972, New York, Wiley InterScience Publication.
2.
SimsCT, StoloffNS, HagelWC: ‘The superalloys 2’; 1987, New York, Wiley InterScience Publication.
3.
da SilvaCLM, ScottiA: ‘The influence of double pulse on porosity formation in aluminium GMAW’, J. Mater. Process. Technol., 2006, 171, 366–372.
4.
PraveenP, YarlagaddaPKDV, KangMJ: ‘Advancements in pulse gas metal arc welding’, J. Mater. Process. Technol., 2005, 164–165, 1113–1119.
5.
GhoshPK, DornL, HübnerM, GoyalVK: ‘Arc characteristics and behaviour of metal transfer in pulsed current GMA welding of aluminium alloy’, J. Mater. Process. Technol., 2007, 194, 163–175.
6.
RosadoT, AlmeidaP, PiresI, MirandaR, QuintinoL: Proc. 5th Cong. Luso-Moçambicano de Engenharia: ‘Innovations in arc welding’; 2008, Porto, Universidade do Porto, 44A004.
7.
IordachescuaD, QuintinoL: ‘Steps toward a new classification of metal transfer in gas metal arc welding’, J. Mater. Process. Technol., 2008, 202, 391–397.
8.
ZhangHT, FengJC, HeP, ZhangBB, ChenJM, WangL: ‘The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel’, Mater. Sci. Eng. A, 2009, A499, 111–113.
9.
IkeaguCR: ‘Evaluating the effect of different welding processes on the distortion of 4 mm thick DH36 ship panels’, MSc thesis, Cranfield University, Cranfield, UK, 2007.
10.
PintoH, PyzallaA, HacklH, BrucknerJ: ‘A comparative study of microstructure and residual stresses of CMT-, MIG- and laser-hybrid welds’, Mater. Sci. Forum, 2006, 524–525, 627–632.
11.
FengJ, ZhangH, HeP: ‘The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding’, Mater. Des. Mater. Des., 2009, 30, 1850–1852.
12.
ZhangHT, FengJC, HeP, HacklH: ‘Interfacial microstructure and mechanical properties of aluminium–zinc-coated steel joints made by a modified metal inert gas welding–brazing process’, Mater. Charact., 2007, 58, 588–592.
13.
WildenJ, JahnS, ReichS, Dal-CantonS: ‘Cladding of aluminum substrates with iron based wear resistant materials using controlled short arc technology’, Surf. Coat. Technol., 2008, 202, 4509–4514.
14.
OptasanuV, SallamandP, MartinB, MontesinT: ‘Modélisation numérique avec apport de matière du soudo-brasage des assemblages hétérogènes acier/aluminium’, Proc. 18th Cong. Français de Mécanique, Grenoble, France, August 2007, AFM.
15.
AgudoL, EyidiD, SchmaranzerCH, ArenholzE, JankN, BrucknerJ, PyzallaAR: ‘Intermetallic FexAly-phases in a steel/Al-alloy fusion weld’, J. Mater. Sci., 2007, 42, 4205–4214.
16.
KuoC.-M, YangT.-T, BorH.-Y, WeiC.-N, TaiC.-C: ‘Aging effects on the microstructure and creep behaviour of Inconel 718 superalloy’, Mater. Sci. Eng. A, 2009, A510–A511, 289–294.
17.
BouseGK: ‘Superalloys 718, 625 and various derivatives’, (ed. LoriaE A, ed); 1989, Warrendale, PA, TMS.
18.
Abdul JawwadAK, StrangwoodM, DavisCL: ‘Microstructural modification in full penetration and partial penetration electron beam welds in inconel 718 (IN-718) and its effect on fatigue crack initiation’, Metall. Mater. Trans. A, 2005, 36A, 1237–1247.
19.
AntonssonT, FredrikssonH: ‘The effect of cooling rate on the solidification of INCONEL 718’, Metall. Mater. Trans. B, 2005, 36B, 85–96.
20.
AllenAJ, HutchingsMT, WindsorCG, AndreaniC: ‘Neutron diffraction methods for the study of residual stress fields’, Adv. Phys., 1985, 34, 445–473.
21.
MoninVI, GurovaT, CastelloX, EstefenSF: ‘Analysis of residual stress state in welded steel plates by X-ray diffraction method’, Rev. Adv. Mater. Sci., 2009, 19, 172–175.
22.
JamesMN, WebsterPJ, HuguesDJ, ChenZ, RatelN, TingS.-P, BrunoG, SteuwerA: ‘Correlating weld process conditions, residual strain and stress, microstructure and mechanical properties for high strength steel – the role of neutron diffraction strain scanning’, Mater. Sci. Eng. A, 2006, A427, 16–26.
