Influence of initial gap on weld expulsion in resistance spot welding of dual phase steel

Abstract

The weld expulsion is prone to occur and severely affects the nugget quality when the initial gap between dual phase (DP) steel sheets exist in resistance spot welding (RSW). To investigate the effect of initial gap on weld expulsion, a finite element model was developed to analyse the weld nugget formation process with different initial gaps for DP steels. An estimation method of expulsion occurrence based on the ratio of the nugget radius R_n and the contact radius R_c between sheets was proposed to get the critical initial gap without expulsion. The simulation and experimental results showed that the weld expulsion would not happen until the gap spacing reaches the critical value. The critical initial gap of DP steel is much smaller than that of low carbon steel. For both DP steel and low carbon steel, the critical initial gap would increase with the thickening of the steel sheet.