Similar and dissimilar friction stir welds made of aluminium alloys 2017-T6 and 6005A-T6 are compared in terms of heat inputs, temperatures, material flow distributions and resulting local and overall tensile properties. Similar welds are systematically hotter and weaker than the dissimilar welds. Predictions of a three-dimensional finite element model of the tensile test transverse to the weldline are assessed towards local deformation fields measured by digital image correlation. Deformation systematically localises on the weakest heat affected zone, which is on the 6005A side in the dissimilar welds.
ShibayanagiT. and MaedaM.: ‘Characteristics of microstructure in dissimilar FSW joints of 5083/6061 Al alloys’, Proc. 5th FSW Symp., Metz, France, September 2004, TWI.
ScialpiA., de GiorgiM., de FilippisL. A. C., NobileR. and PanellaF. W.: ‘Mechanical analysis of ultra-thin friction stir joined sheets with dissimilar and similar materials’, Mater. Des., 2008, 29, 928–936.
5.
JonckheereC., SimarA. and de MeesterB.: ‘Mechanical properties of dissimilar friction stir welds joining 6xxx to 2xxx aluminium alloys’, Proc. 8th FSW Symp., Timmendorfer Strand, Germany, May 2010, TWI.
6.
CavaliereP., de SantisA., PanelleF. and SquillaceA.: ‘Effect of welding parameters on mechanical and microstructural properties of dissimilar AA-6082-AA2024 joints produced by firction stir welding’, Mater. Des., 2009, 30, 609–616.
7.
GerardH. and EhrstromJ. C.: ‘Friction stir welding of dissimilar alloys for aircraft’, Proc. 5th FSW Symp., Metz, France, September 2004, TWI.
8.
KhodirS. A. and ShibayanagiT.: ‘Friction stir welding of dissimilar AA2024 and AA7075 aluminium alloys’, Mater. Sci. Eng. B, 2008, B148, 82–87.
9.
LarssonH., KarlssonH., StoltyS. and BergqvistE. L.: ‘Joining of dissimilar Al-alloys by friction stir welding’, Proc. 2nd FSW Symp., Gothenburg, Sweden, June 2000, TWI.
10.
SteuwerA., PeelM. J. and WithersP. J.: ‘Influence of welding speed on the properties of AA5083-AA6082 dissimilar friction stir welds’, Proc. 6th FSW Symp., Saint-Sauveur, Canada, October 2006, TWI.
11.
YamamotoM., GerlichA., NorthT. H. and ShinozakiK.: ‘Cracking in dissimilar Mg alloy friction stir spot welds’, Sci. Technol. Weld. Join., 2008, 13, (7), 583–592.
12.
ChenT.: ‘Process parameters study on FSW joint of dissimilar metals for aluminium-steel’, J. Mater. Sci, 2009, 44, 2573–2580.
13.
LeeC. Y., ChoiD. H., YeonY. M. and JungS. B.: ‘Dissimilar friction stir spot welding of low carbon steel and Al-Mg alloy by formation of IMCs’, Sci. Technol. Weld. Join., 2009, 14, (3), 216–220.
14.
LiuH. J., FujiiH., MaedaM. and NogiK.: ‘Tensile properties and fracture locations of friction-stir-welded of 2017-T351 aluminium alloy’, J. Mater. Process. Technol., 2003, 142, 692–696.
15.
SimarA., BrechetY., de MeesterB., DenquinA. and PardoenT.: ‘Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6’, Mater. Sci. Eng. A, 2008, A486, 85–95.
16.
NielsenK. L., PardoenT., TvergaardV., de MeesterB. and SimarA.: ‘The effect of stage IV hardening on plastic flow localisation and damage development in friction stir welded 6005A aluminium alloy’, submitted for publication, 2010.
17.
SimarA., Lecomte-BeckersJ., PardoenT. and de MeesterB.: ‘Effect of boundary conditions and heat source distribution on temperature distribution in friction stir welding’, Sci. Technol. Weld. Join., 2006, 11, (2), 170–177.
18.
GenevoisC., DeschampsA., DenquinA. and Doisneau-cottigniesB.: ‘Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds’, Acta Mater., 2005, 53, 2447–2458.
19.
SimarA., PardoenT. and de MeesterB.: ‘Effect of rotational material flow on temperature distribution in friction stir welds’, Sci. Technol. Weld. Join., 2007, 12, (4), 324–333.
