Development of low spatter CO 2 arc welding process with high frequency pulse current

Abstract

Metal transfer phenomena and spatter generation in CO₂ arc welding with a solid wire were investigated, and a low spatter welding process using a high frequency pulse rectangular current was developed. The optimal conditions of high frequency pulse CO₂ arc welding were determined to be a peak current of 450–550 A and pulse frequency of 450–750 Hz. These high frequency pulse currents influenced the droplet oscillation due to resonance between the applied pulse frequency and the natural frequency of the droplet. A droplet was regularly transferred by 9–11 pulses, and the average interval of metal transfer was ∼16 ms, which was half of that in conventional CO₂ arc welding. The average droplet weight is 34 mg, showing a large reduction in comparison with that of the conventional method. As a result, the total spatter weight was reduced by 70% in comparison with the conventional method, and particularly large spatters more than 0·5 mm in diameter were reduced from 25 to 3 mg s⁻¹.

Keywords

CO2 GAS SHIELDED ARC WELDING SPATTER WELDING WIRE HIGH FREQUENCY PULSE CURRENT

Get full access to this article

View all access options for this article.

References

Suzuki

: ‘CO₂ gas and non-gas arc welding’; 1970, Tokyo, Sanpo Publications, Inc.

Bingul

, Cook

G. E.

and Strauss

A. M.

: ‘Dynamic model for electrode melting rate in gas metal arc welding process’, Sci. Technol. Weld. Join., 2001, 6, (1), 41–50.

Cuiuri

, Norrish

and Cook

: ‘New approaches to controlling unstable gas metal arc welding’, Aust. Weld. J., 2002, 47, (3), 39–47.

Ando

and Yamamoto

: ‘A study of spatter generation in CO₂ gas shielded arc welding method’, Prep. Nat. Meet. JWS, 1962, 31, (3), 218–219.

Yamada

and Rokujo

: ‘Spattering in CO₂ arc welding’, R&D Kobe Steel Eng. Rep., 1981, 31, (4), 69–72.

Kataoka

, Ikeda

and Yasuda

: ‘Influence of minor elements in electrode wire on spattering phenomena in CO₂ gas shielded arc welding’, Q. J. Jpn Weld. Soc., 2007, 25, (3), 410–415.

Mita

and Shinada

: ‘Waveform control for reduction spatter in CO₂ gas shielded arc welding’, Proc. 5th Int. Symp. of the Japan Weldin² g Society, Kobe, Japan, April 1990, JWS, 121–126.

J. R.

and Wu

L. Z.

: ‘Simulation of droplet transfer process and current waveform control of CO₂ arc welding’, Trans. Nonferr. Met. Soc. China, 2001, 11, (5), 667–670.

Zhu

Z. M.

, Wu

W. K.

and Chen

: ‘Effective control approach on molten droplet size in waveform controlled short circuit CO₂ arc welding’, Sci. Technol. Weld. Join., 2007, 12, (1), 55–62.

10.

Matsuda

, Ushio

, Nishikawa

and Yokoo

: ‘Spattering in pulsed CO₂ welding’, Trans. Jpn Weld. Res. Inst., 1985, 14, (1), 13–19.

11.

Tabata

, Ueguri

and Mizuno

: ‘Non-spatter CO₂ arc welder with a high-repetition-rate pulsative current source’, Prep. Nat. Meet. JWS, 1993, 53, 52–53.

12.

Innami

, Wang

J. B.

, Ihara

, Hamamoto

and Tanaka

: ‘Study on the CO₂ gas shielded pulsed-arc welding method’, Prep. Nat. Meet. JWS, 1997, 61, 72–73.

13.

Matsunawa

, Yamamoto

and Hiramoto

: ‘Pulse arc welding’, J. Jpn Weld. Soc., 1984, 53, (6), 20–58.

14.

Maruo

, Hirata

and Noda

: ‘Hcat contents and temperature of metal droplets in pulse MIG welding’, Q. J. Jpn Weld. Soc., 1984, 2, (4), 3–8.

15.

Zhang

Y. M.

and Li

P. J.

: ‘Modified active control of metal transfer and pulsed GMAW of titanium’, Weld. Res. Suppl., 2001, 80, (2), S54–S61.

16.

Takeuchi

and Shinada

: ‘Spatter and blowhole formation phenomena in pulsed gas shielded metal arc welding’, Mater. Sci. Technol., 1991, 7, (9), 869–876.

17.

Wang

, Huang

P. G.

and Zhang

Y. M.

: ‘Numerical analysis of metal transfer in gas metal arc welding under modified pulsed current conditions’, Metall. Mater. Trans. B, 2004, 35B, (5), 857–866.

18.

Palani

P. K.

and Murugan

: ‘Metal transfer and burn off characteristics of pulsed current gas metal arc welding: a review’, Int. J. Mater. Prod. Technol., 2006, 18, (3–4), 76–85.

19.

Langus

, Kralj

and Grem

: ‘Optimisation of welding parameters in pulsed MIG/MAG welding with width-controlled sine-wave current pulses’, Int. J. Mater. Prod. Technol., 2007, 29, (1–4), 255–271.

20.

Hirata

, Tsujimura

, Ohji

, Kataoka

and Ikeda

: ‘Modeling of molten drop oscillation in gas shielded metal arc welding’, Q. J. Jpn Weld. Soc., 2007, 25, (3), 421–425.