Influence of tool design on mechanical properties of AZ31 friction stir spot welds

Abstract

The influence of tool design on the energy output, microstructural features and overlap shear strength properties of friction stir spot welds made of AZ31 base material is examined. The mechanical properties of AZ31 friction stir spot welds made using three-flat/threaded tools are superior to those in joints made using a tool with a threaded pin at all tool rotational speed settings. It is proposed that the failure load properties are optimised when the friction stir spot welding operation is carried out in such a manner that it produces a large bonded width, a small v/t ratio (the height of the hook region above the sheet intersection divided by the thickness of the upper sheet) and a hook region, which is curved outwards from the tool axis.

Keywords

FRICTION STIR SPOT WELDING TOOL GEOMETRY OVERLAP SHEAR STRENGTH AZ31

Get full access to this article

View all access options for this article.

References

Avedesian

M. M.

and Baker

: ‘ASM specialty handbook: magnesium and magnesium alloys’; 1999, Materials Park, OH, ASM International.

Thomas

W. M.

: ‘Friction stir butt welding’, International patent application nos. PCT/GB92 and 9125978·8, 1991.

Sakano

, Murakami

, Yamashita

, Hyoe

, Fujimoto

, Inuzuka

, Nagao

and Kashiki

: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001, TWI, 645–650.

, Gerlich

and North

T. H.

: SAE technical series, 2005-01–1255.

Freeney

, Sharma

and Mishra

: Proc. SAE 2006 World Cong., Detroit, MI, USA, April 2006, SAE, Paper 2006-01–0969.

Blundell

, Han

, Hewitt

and Young

: SAE technical series 2006-01–0968.

Tozaki

, Uematsu

and Tokaji

: Int. J. Mach. Tools Manuf., 2007, 47, 2230–2236.

Pan

T.-Y.

: SAE technical series, SP-2139, 2007–01–1702.

Lin

P-C

, J. Pan and T. Pan: Int. J. Fatigue, 2008, 30, 74–105.

10.

Tweedy

B. M.

, Widener

C. A.

, Merry

J. D.

, Brown

J. M.

and Burford

D. A.

: SAE

Paper

192008-01-1135, April 2008.

11.

Hunt

, Badarinarayan

and Okamoto

: Proc. SAE 2006 World Cong., Detroit, MI, USA, April 2006, SAE, Paper 2006-01–0970.

12.

Mitlin

, Radmilovic

, Pan

, Feng

and Santella

: Mater. Sci. Eng. A, 2006, A441, 79–96.

13.

Arul

S. G.

, Miller

S. F.

, Kruger

G. H.

, Pan

T. Y.

, Mallick

P. K.

and Shih

A. J.

: Sci. Technol. Weld. Join., 2008, 13, 629–637.

14.

Badarinarayan

, Yang

and Zhu

: Int. J. Mach. Tools Manuf., 2009, 49, 142–148.

15.

Fujimoto

, Koga

, Abe

, Sato

Y. S.

and Kokawa

: Sci. Technol. Weld. Join., 2008, 13, 663–670.

16.

Gerlich

A. P.

, Yamamoto

, Shibayanagi

and North

T. H.

: SAE

Paper

192008-01-0146, April 2008.

17.

Sun

, Yin

Y. H.

, Gerlich

A. P.

and North

T. H.

: Sci. Technol. Weld. Join., 2009, submitted.

18.

North

T. H.

, Gerlich

and Yamamoto

: Proc. IIW Meet. on ‘Friction stir spot welding’, Hamburg, Germany, March 2007, GKSS Labs.

19.

Kinloch

A. J.

: ‘Adhesion and adhesives’, 215–231; 1987, Cambridge, Chapman and Hall.

20.

: ‘Polymer interface and adhesion’, 504–518; 1982, New York, NY, Marcel Dekker.

21.

Goland

and Reissner

: J. Appl. Mech, Trans. ASME, 1944, 66, A17–A27.