The paper reviews scientific and technological issues related to repair weldability of nickel base single crystal superalloys. The role of weld pool geometry and crystallographic orientation of the single crystals on the solidification grain structure was discussed. Results of asymmetric cracking during welding of thin crystals due to stray grain formation were introduced. The role of high resolution characterisation tools including electron microscopy and atom probe field ion microscopy in understangding non-equilibrium microstructure evolution was demonstrated. Computational methodologies to describe the dynamic thermal, stress and microstrutural evolutions to describe weldability as well as the performance of these welds were discussed.
DollD. B.: ‘Proceedings of gas turbine materials technology’, (ed. P. J. Maziasz, I. G. Wright, W. J. Brindley, J. Stringer and C. O. Brien), 125; 1998, Rosemont, IL, Materials Solutions.
2.
DavidS. A., VitekJ. M., BabuS. S., BoatnerL. and ReedR. W.: Sci. Technol. Weld. Joining, 1997, 2, 79.
3.
DuvallD. S., OwczarskiW. A. and PaulonisD. F.: Weld. J., 1974, 53, 203.
4.
CampbellC. E. and BoettingerW. J.: Metall. Mater. Trans. A, 2000, 31, 2835.
5.
BabuS. S., DavidS. A. and MillerM. K.: Appl. Surf. Sci., 1996, 94/95, 280.
6.
BabuS. S., DavidS. A., VitekJ. M. and MillerM. K.: J. de Physique IV, 1996, 6, C5–253.
7.
DavidS. A., BabuS. S. and VitekJ. M.: ‘Proceedings of mathematical modeling of weld phenomena 4’, (ed. H. Cerjak), 269; 1998, Materials Modeling Series, IOM communications Ltd.
8.
VitekJ. M., DavidS. A. and BoatnerL. A.: Sci. Technol. Weld. Joining, 1997, 2, 11–19.
9.
FengZ., DavidS. A., ZachariaT. and TsaiC. L.: Sci. Technol. Weld. Joining, 1997, 2, 109
10.
GaumannM., BezenconC., CanalisP. and KurzW.: Acta Mater., 2001, 49, 1051.
11.
KurzW.: Adv. Eng. Mater., 2001, 3, 443.
12.
MigliettiW. M., BensonJ., BlumF., HarmsP. and PennefatherR.: ‘Proc. joining and repair of gas turbine components, materials solutions 1997’, (ed. D. Tillack and R. Thomson), Materials Park, OH, ASM International.
13.
GoodwinG. M.: Weld. J., 1987, 66, 33s.
14.
RappazM., DavidS. A., VitekJ. M. and BoatnerL. A.: Metall. Trans., 1989, 20A, 1125.
15.
RappazM., DavidS. A., VitekJ. M. and BoatnerL. A.: Metall. Trans., 1990, 21A, 1767.
16.
BabuS. S. and VitekJ. M.: Unpublished research; 2002, Oak Ridge, TN, USA, Oak Ridge National Laboratory.
17.
ParkJ.-W., BabuS. S., VitekJ. M., KenikE. A. and DavidS. A.: J. Appl. Phys., 2003, 94, 4203–4209.
18.
HuntJ. D.: Mater. Sci. Eng., 1984, 65, 75.
19.
GaumannM., TrivediR. and KurzW.: Mater. Sci. Eng., 1997, A226–228, 763.
20.
KurzW. and FisherD. J.: ‘Fundamentals of solidification’, 4th revised edn, 242; 1998, USA, Trans Tech Publications Ltd.
21.
BabuS. S., MillerM. K., VitekJ. M. and DavidS. A.: Acta Mater., 49, 4149.
22.
AlberryP. J. and JonesW. K. C.: Metal. Technol., 1982, 9, 410.
23.
AshbyM. F. and EasterlingK. E.: Acta Metall., 1982, 30, 1969.
24.
ZachariaT., VitekJ. M., GoldakJ. A., DebroyT. A., RappazM. and BhadeshiaH. K. D. H.: Model. Simul. Mater. Sci. Eng., 1995, 3, 265.
25.
GandinC. A., RappazM. and TintillierR.: Metall. Trans. A, 1993, 24, 467.
26.
GoldakJ., BibbyM., MooreJ., HouseR. and PatelB.: Metall. Trans. B, 1986, 17, 587.
27.
RappazM.: Int. Mater. Rev., 1989, 34, 93.
28.
HunzikerO., DyeD. and ReedR. C.: Acta Mater., 2000, 48, 4191.
29.
DyeD., HunzikerO. and ReedR. C.: Acta Mater., 2001, 49, 683.
30.
SundmanB., JanssonB. and AnderssonJ. O.: Calphad, 1985, 9, 153.
VitekJ. M., DavidS. A. and BabuS. S.: Proc. 5th Int. Conf. on ‘Welding and repair technology for power plants’, Point Clear, AL, USA, June 2002, No. 1007013; EPRI.
