A method of starting arc welding using a plasma channel formed between electrodes in a tungsten inert gas arc welding system was demonstrated. The plasma channel was generated by gas breakdown in the laser beam path. In a previous study by the present authors, the arc welding could be started using a laser produced plume. Results in the present study indicated that the laser energy required to start the process using the plasma channel was lower than that using the plume.
Von AllmenM. and BlatterA.: in ‘Laser-beam interactions with materials’, 2nd edn, 124–125; 1995, Berlin, Springer Verlag.
9.
YabeT.: ‘Annual collaboratiun report of Institute of Laser Engineering, 1996’, Institute of Laser Engineering, osaka University, 1996, 219–220 (in Japanese).
10.
RaizerYu. P.: in ‘Laser-induced discharge phenomena, studies in Soviet science’, 206–212; 1977, New York/London, Consultants Bureau.
