Factors affecting initiation of pitting corrosion in super martensitic stainless steel weldments

Abstract

In the present investigation optical microscopy, in combination with sputtered neutral mass spectrometry (SNMS), has been used to examine the conditions for initiation of pitting corrosion in the heat affected zone (HAZ) of two super martensitic (SM) stainless steel weldments. It is shown that the corrosion resistance depends mainly on the nature of the surface oxide, as determined by the oxygen potential in the shielding gas and the HAZ temperature–time relationship, and less strongly on the underlying microstructure. In the absence of H₂S the initiation is associated with spalling of the iron enriched chromium oxide within a narrow region approximately 6 mm from the fusion line, where the contaminated oxide layer is thinnest. As H₂S is introduced, the region close to the fusion boundary becomes susceptible to localised corrosion because of the more extensive metal oxidation. Thus, the high temperature oxidation and iron oxide scale formation accompanying the welding operation appear to be the main factors affecting pitting corrosion initiation in SM stainless steel weldments.