Abstract
An all-oxide composite was fabricated. Single crystal alumina fibres were coated with a carbon/zirconia slurry, dried, and uniaxially aligned by winding. Matrix material, alumina with 5 vol.-% unstabilised zirconia added, was tape cast on top of the fibres. Pre-pregs were cut, stacked, and laminated to cross-ply material. Final sintering was done by hot isostatic pressing. A heat treatment was added to remove the carbon and create a porous zirconia interphase. Flexure strengths around 200 MPa were obtained for composites at room temperature while a strength of 124 MPa was recorded at 1200°C. The mechanical properties and non-brittle behaviour was sustained after aging at 1400°C for 1000 h in air.
Get full access to this article
View all access options for this article.
