The aim of the present work was the recovery of nickel and copper from metal finishing hydroxide sludges by ammoniacal leaching. Actually the study was split into two main parts. First, the recovery of the metals in the presence of ammonia was subjected to theoretical approaches followed by numerical and computer calculations to determine optimal leaching conditions (pH and total concentration). In this part the solubility diagrams were plotted versus two parameters: pH and [NH3]T. second, the study was carried out experimentally. The work was performed on pure metals hydroxides and then on electroplating sludges. The solubility variation versus pH at various ammonia concentrations and versus ammonia concentration at various pH values was conducted keeping the free ammonia concentration on the diagram to show the stability regions of soluble metal species. Optimal ammonia concentration for leaching [NH3]total at pH=8 to 11 was found to be less than 6 mol L–1, and a recovery experimental flowsheet was proposed.
WeinerR.: ‘Epuration des eaux résiduaires dans la transformation et la galvanisation des métaux'; 1975, Paris, Eyrolles.
4.
PhuleP. P., DixitS. and MallikarjunanD. R.: ‘The recovery of principal metal values from metal finishing hydroxide sludge’, Indian J. Technol., 1985, 23, 462–464.
5.
BrooksC. S.: ‘Metal recovery from industrial wastes’, J. Met., 1986, 38, 50–57.
6.
ShamsudinM.: ‘Metal recovery from scrap and waste’, Journal of Metals, 1986, 38, 24–31.
7.
JosephJ. and WerbickiC.: ‘Wastes treat or recovery ? an introduction to resource recovery’, Proc. 73rd AESF Annu. Tech. Conf., leveland, OH, USA, September 1986, American Electroplaters and Surface Finishers Society, Paper E-1.
8.
DahnkeD. R., TwidwellL. G., ArthurB. W. and NordwickS. M.: ‘Selective recovery of metal values from electroplating sludges by phosphate process’, Proc. 73rd AES Annu. Tech. Conf., Los Angeles, CA, USA, November 1986, American Electroplating Society, Paper C-3.
9.
RobertW. R. and JeffF.: ‘The dissolution/leaching behavior of metal hydroxide/metal sulfide sludges from plating wastewaters’, Hazard. Waste Hazard. Mater., 1987, 4, 325–355.
10.
BrooksC. S.: ‘Nickel metal recovery from metal finishing industry wastes’, Proc. 42nd Ind. Waste Conf., 847-852; 1988, Lafayette, IN, Purdue Univer sity.
11.
HepworthM. T.: ‘Beckstead, chromium recovery from electro-plating sludage’, Plat. Surf Finish., 1989, 76, 50–52.
12.
ChmielezskiA. G., UrbanskiT. S. and MigdalW.: ‘Separation technologies for metals recovery from industrial wastes’, Hydrometallurgy, 1997, 45, 333–344.
13.
JandovJ., StefanovT. and NiemezykovR.: ‘Recovery of Cu — concentrates from waste galvanic copper sludges’, Hydrometallurgy, 2000, 57, 77–84.
14.
MatthewG., BeattieJ. and KennedyB.: ‘Recovery of chromate from electroplating sludge’, Waste Manage. Res., 2000, 18, 380–385.
15.
WangY. and ZhouC. S.: ‘Hydrometallurgical process for recovery of cobalt from zinc plant residue’, Hydrometallurgy, 2002, 63, 225–234.
16.
VeglioF., QuaresimaR., FornariP. and UbaldiniS.: ‘Recovery of valuable metals from electronic and galvanic industriel wastes by leaching and electrowining’, Waste Manage., 2003, 23, 245–252.
17.
MiskufovaA., HavlikT., LanbertovaM. and UkasikM.: ‘Hydrometallurgical route for copper, zinc and chromium recovery from galvanic sludge’, Acta Metall Slovaca, 2006, 12, 293–302.
18.
DaliborK.: ‘Sulfidation treatment of plating sludges and molten incineration fly ashes for recovery of heavy metals’, PhD thesis. Nagoya University, Nagoya, Japan, 2007
19.
BouhidelK. E. and SalhiR.: ‘Selective recovery of metal values from electroplating sludges: a numerical and modeling approach’, Proc. Symp. on ‘Energy and electrochemical processing for a cleaner environment’, Vol. 97-28, 323-329; 1998, Pennington, NJ, Electrochemical Society.
BrooksC. S.: ‘Applications of solvent exatraction in treatment of metal finishing wastes’, Met. Finish., 1987, 85, (3), 55–60.
22.
PandyB. D., KumarV. and AkerkarD. D.: ‘Extraction of copper from ammoniacal solution by LIX-84’, Trans. Indian Institut. Met., 1988, 41, (3), 265–267.
23.
PandyB. D., KumarV., BagchiD. and AkerkarD. D.: ‘Extraction of nickel and copper from the ammoniacal leach solution of sea nodules by LIX64N’, Ind Eng. Chem. Res., 1989, 28, (11), 1664–1669.
24.
PandyB. D. and KumarV.: ‘Extraction of copper from ammoniacal leach liquor of indian ocean sea nodules’, Hydrometallurgy, 1991, 26, 34–45.
25.
ChinmayP. and Bhaskara SarmaP. V. R.: ‘Separation of nickel and copper from ammoniacal solution through co-extraction and selective stripping using LIX84 as the extractants’, Hydrometallurgy, 2000, 54, 195–204.
26.
BrianP.: ‘Metals recycling from waste sludges by ammoniacal leaching followed by solvent extraction’, EPA contract no. 68D01033, 2001.
27.
Ramachandra ReddyB., Neela PriyaD., S. Venkates Wara Rao and P. Radhika: ‘Solvant extraction and separation of Cd(II), Ni(II) and Co(II) from chloride leach liquors of spent Ni—Cd batteriers using commercial organo—phosphorus extractans’, Hydrometallurgy, 2005, 77, 253–261.
28.
KuhnA. T., NeufeldP. and YoungK.: ‘The electrodeposition of copper—silver and copper—nickel alloy powders from aqueous ammoniacal solution’, J. Appl. Electrochem., 1984, 14, 605–613.
29.
ChassaingK., QuangV. and WiartR.: ‘Mechanisme of copper-nickel alloy electrodeposition’, J. Appl. Electrochem., 1987, 17, 1267–1280.
30.
BernardM. and BusnotF.: ‘Usuel de chimie generale et minérale; 2nd, edn; 1984, Paris, Bordas.
31.
CharlotG.: ‘Les reactions chimiques en solution aqueuse et caractérisation des ions’, 7th edn; 1983, Paris, Masson.
32.
MorlaesP. and MorlaesJ.-C.: ‘Solutions aqueuses’; 1981, Paris, Librairie Vuibert.
