The paper proposes a single-stage comminution process for the generation of concrete powder based on high-velocity water jets impinging a solid surface at supersonic speeds of about 670 m s−1. The powder is generated in a one-stage performance directly through erosion processes at the specimen surfaces. Process efficiency depends upon failure mode. It increases if material failure is dominated by transgranular fracture.
SCHREIERM., GROGERT., EHLERSS. and THOMASJ.: ‘Impact crushing of concrete liberation and recycling”, Aufbereitungs-Techn., 1999, 40, 232–241.
3.
EHLERSS., THOMASJ. and DORAB.: ‘Bruch-mechanismen bei der mechanischen Aufschlusszer-kleinerung von Betonkörpern unter Prallbeanspruchung’, DMV-Berichte, 1996, 228, 227–235.
4.
WACHSMANNS. and PATZELTB.: ‘Concrete crushing in the impact crusher and simulation of baffle plate wear’, Aufbereitungs-Techn., 1997, 38, 641–652.
5.
MOMBERA. W.: ‘The fragmentation of cementitious composites in a jaw breaker’, Theoret. Appl Fracture Mech, 2002, 38, 151–164.
6.
MOMBERA. W.: The efficiency of mechanical concrete comminution’, Eng. Fracture Mech, 2003, 70, 81–91.
7.
KHANALM., SCHUBERTW. and THOMASJ.: ‘Ball impact and crack propagation - simulations of compound material’, Granular Matter, 2004, 5, 177–184.
8.
LINSSE. and MOLLERA.: ‘High performance sonic impulses - a new method for crushing of concrete’, Recovery - Recycling - Re-Integration, Conference–CD, Geneva, 2002.
9.
MOMBERA. W.: ‘Aggregate liberation from concrete by flow cavitation’, Int..1 Mineral Proc., 2004, 74, 177–187.
10.
ISOBET.: ‘High-quality aggregate reproduction method using water jet’, Proc. 7th Pacific Rim Int. Conf. Water Jetting Technol, (eds.LeeE.), Korean Water Jet Technol., Seoul, 2003, 211-218.
11.
CICCUR. and IMULESIE.: ‘Design of a waterjet assisted machine for mineral comminution’, (ed. GeeC.), Jetting Technology, Bury St Edmunds, Mech. Eng. Pub. 1996, 539–548.
12.
MOMBERA. W.: ‘Water jet applications in construction engineering’, Rotterdam. Balkema, 1998.
MOMBERA. W: ‘Untersuchungen zum Verhalten von Beton unter der Belastung durch Druckwasserstrahlen’, Düsseldorf, VDI, 1993.
15.
MOMBERA. W.: ‘Concrete failure due to air-water jet impingement’, J Mater Sci., 2000, 35, 2785–2789.
16.
MOMBERA. W.: ‘An SEM-study of high-speed hydrodynamic erosion of cementitious composites’, Composites - Part B, 2003, 34, 135–142.
17.
FRANKJ. N. and CHESTERJ. W.: ‘Fragmentation of concrete by hydraulic jets’, US Bureau of Mines Report of Investigation, No. 7572, Minneapolis, 1971.
18.
KAUWV.: ‘Optimierung des Einsatzes von Hochdruck-Wasserstrahl-Systemen bei der Betonuntergrund-vorbereitung’, Dissertation, RWTH Aachen, 1996.
19.
MOMBERA. W.: ‘Fluid jet erosion as a non-linear fracture process’, Wear, 2001, 250, 101–107.
20.
MOMBERA. W and KOVACEVICR.: ‘Statistical character of the failure of multiphase materials due to high pressure water jet impingement’, Int. J Fracture, 1995, 71, 1–14.
21.
WERNERM.: Tinflussparameter und Wirkmechanismen beim Abtrag von Mörtel und Beton mit dem Hochdruck-wasserstrahr, dissertation, RWTH Aachen, 1991.
22.
LEACHS. J. and WALKERG. I.: ‘Some aspects of rock cutting by high speed water jets’, Phil. Trans. R Soc. Land., 1966, A260, 295–303.
23.
MOMBERA. W: ‘A dimensionless number for the control of ultra-high pressure systems’, Proc. Inst. Mech Eng.,.1 Power Energy, 2000, 213, 645-655.
24.
MOMBERA. W. and KOVACEVICR.: ‘Principles of abrasive water jet machining’, London, Springer, 1998.
