The present position of theory and practice concerning methods of increasing the strength of ferrous and nonferrous alloys by thermomechanical and mechanical/thermal treatment is described. Special attention is given to methods using substructural strengthening as they allow combinations of high strength and good ductility to be obtained.
Get full access to this article
View all access options for this article.
References
1.
LipsE. M. H. and Van ZuilenH., Metal Progr., 1954, 66, (2), 103.
2.
OdingI. A., et al.,‘Theory of Creep and Prolonged Strength of Metals’. 1959: Metallurgizdat.
3.
IvanovaV. S. and GordienkoL. K., ‘New Ways to Increase Metals Strength’.1964: Nauka.
4.
KhM.. Shorshorov, L. K. Gordienko,et al., `Thermoplastical Strengthening of Martensite Steels and Titanium Alloys’. 1971: Nauka.
5.
DubovitskayaN. V. and LarikovL. N., Metallophysika, Respublikanskij Mezvedomstvennyi Sbornik, 1970, 29, 30.
6.
SmithC. J. E. and DillamoreI. L., Metal Sci. J., 1970, 4, 161.
7.
ZasimchukE. E. and MaksimenkoE. A., Metallophysika, Respublikanskü mezvedomstvennyi Sbornik, 1970, 31, 66.
8.
ZasimchukE. E. and MaksimenkoE. A., ibid., 1969, 30, 121.
9.
GuttmannV., Metale, 1969, 23, (12), 1277.
10.
LarikovL. N., ‘Physical Fundamentals of Metals Strength and Plasticity’, p.255. 1963: Metallurgizdat.
11.
HarlettT. and HansenR. D., Trans. Amer. Soc. Metals, 1955, 47, 50.
12.
IvanovaV. S., GordienkoL. K., et al.,‘Dislocations Effect on Metals Strengthening and Failure.’1965: Nauka.
13.
SherbyO. D., GoldbergA., and DornJ. E., Trans. Amer. Soc. Metals, 1954, 46, 81.
14.
AzazaV. M., GindinI. A., Ya. D. Starodubov, and B. I. Shaporal,Fizika Metallov i Metallovedenie, 1963, 15, (5), 729.
15.
RozenbergV. M. and ShalimovaA. V., Doklady Akad. Nauk SSSR, 1963, 148, 82.
16.
BernshteinM. L., ‘Thermomechanical Treatment of Metals and Alloys’,Vols. 1 and 2. 1968: Metallurgia.
17.
KhM.. Shorshorov and V. N. Meshcheryakov, Proceedings of International Conference on Titanium (London,1968), p. 583. 1970: Oxford, &c. (Pergamon Press).
18.
KhM.. Shorshorov, ‘Metallography of Welding for Steel and Titanium Alloys’.1965: Nauka.
19.
KhM.. Shorshorov, V. I. Antipov, A. M. Senin,et al., Metallo-vedenie i Term. Obrabot. Metallov, 1966, (9), 30.
20.
AntipovV. I. and Kh. ShorshorovM., Fizika i Khim. Obrabot. Mat., 1967, (6), 33.
21.
AntipovV. I. and ShorshorovM. Kh., ibid., (I), 114.
22.
McLeanD., ‘Grain Boundaries in Metals’.1957: Oxford(Clarendon Press).
23.
MizonovV. M. and Belokon’Yu. I., Avtorskoe svidetel'stvo (212306)Bulleten ‘Izobretenii Promyshlennye Obraztsy Tovarnye Znaki’, 1968, (9).
24.
KhM.. Shorshorov, A. S. Tikhonov, and G. N. Kofanova,Fizika i Khim. Obrabot. Mat., 1972, (6), 89.
25.
KhM.. Shorshorovet al., `Superplasticity of Metallic Materials’, 1973: Nauka.
