Abstract
The growth in demand for high quality metal alloys has placed considerable emphasis on the type of cooling methods used in manufacturing processes, in particular, the production of highly tailored steel through controlled cooling on the runout table. The present study focuses on the heat transfer (cooling of hot rolled steel strips) on a runout table. The purpose of the study was to develop an efficient experimental method and collect temperature data under conditions similar to those that occur during industrial runout table conditions in a steelmill. Surface and internal temperatures were measured during transient cooling of a flat, upward facing fixed steel plate cooled by a highly subcooled single, circular, free surface jet of water. Measurements were made at stagnation and several streamwise distances from the stagnation point. A numerical, finite difference model was applied to calculate the surface heat flux using measured temperatures. The effect of water flowrate and subcooling on the overall heat transfer with emphasis on the maximum heat flux is discussed.
Get full access to this article
View all access options for this article.