Predictability of Charpy impact toughness in thermomechanically control rolled (TMCR) microalloyed steels

Abstract

A number of empirical equations, based primarily on average metallographic grain size and carbide thickness, exist to predict the Charpy impact transition temperature in steels. Some of these commonly used equations, successful for normalised steels, have been shown in this paper to be inadequate for predicting the transition temperature for thermomechanically control rolled (TMCR) microalloyed steels. Thermomechanical control rolling can produce clusters of small grains with low angle grain boundaries, i.e., the steel shows mesotexture. The cleavage facet size in TMCR steels has been found to be significantly larger than the optical grain size and it was also observed that individual cleavage facets can be comprised of multiple grains. In contrast, it was observed for a heat treated steel that the facet size matches the optical grain size and that individual facets consist of single grains. It is concluded that in TMCR steels, the average microstructural unit experienced by the crack front is larger than the optical grain size because mesotexture causes groups of closely orientated grains to be treated as single 'effective' grains. This paper shows that the 50% and 27 J impact transition temperatures can be predicted for TMCR steels using the existing equations if mesotexture and grain boundary carbide size are taken into account.