AdelkhaniH., NasoodiS. and JafariA. H.: ‘A study of the morphology and optical properties of electropolished aluminum in the Vis-IR region’, Int. J. Electrochem. Sci., 2009, 4, 238–246.
4.
AlamK. M., SinghA. P., BodepudiS. C. and PramanikS.: ‘Fabrication of hexagonally ordered nanopores in anodic alumina: An alternative pretreatment’, Surf. Sci., 2011, 605, (3-4), 441–449.
5.
EozénouF., BoudigouY., CarbonnierP., CharrierJ-P., GasserY., MauriceL., PeaugerF., RoudierD. and ServouinC.: ‘Development of vertical electropolishing process applied on 1300 and 704 MHz superconducting niobium resonators’, Phys. Rev. ST Accel. Beams, 2014, 17, 083501.
6.
KassabE., MarquardA., NeelankantanL., FrotscherM., SchreiberF., GriesT., GomesJ. and EggelerG.: ‘On the electropolishing of NiTi braided stents-challenges and solutions’, Materialwissenschaft und Werkstofftechnik, 2014, 45, (10), 920–929.
7.
HryniewiczT. and RokoszK.: ‘Highlights of magnetoelectropolishing’, Front. in Mat., 2014, 1, article 3.
8.
InmanM., TaylorE. J. and HallT.: ‘Electropolishing of passive materials in HF-Free low viscosity aqueous electrolytes,’J. Electrochem. Soc., 2013, 160, (9), E94–E98.
9.
InmanM., HallT., GarichH. and TaylorE. J.: ‘Environmentally benign electropolishing of biomedical alloys’, ASME 2014 Int. Manufac. Sci. and Eng. Conference collocated with the JSME 2014 Int. Conf. on Mat.s and Process. and the 42nd North American Manufac. Research Conf., Vol. 2: Processing, Detroit, Michigan, USA, June 9–13; 2014.
10.
TaylorE. J., HallT., InmanM., SnyderS. and RoweA.: ‘Electropolishing of niobium SRF cavities in low viscosity aqueous electrolytes without hydrofluoric acid’. Proceedings of SRF2013, 2013, Paris, France.
11.
AbbottA. P., RyderK. S. and KonigU.: ‘Electrofinishing of metals using eutectic based ionic liquids’, Trans. Inst. Met. Finish., 2008, 86, (4), 196–204.
12.
LebedevaO., DzhungurovaG., ZakharovA., KultinD., KustovL., KrasovskiiV., KalmykovK. and DunaevS.: ‘Surface state of sacrificial copper electrode by electropolishing in hydrophobic ionic liquid 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide’, ACS Appl. Mater. Interfaces, 2013, 5, 10551–10558.
13.
UdaT., TsukimotoK., NakagawaH., MuraseK., NoseY. and AwakuraY.: ‘Electrochemical polishing of metallic titanium in ionic liquid’, Mat. Trans, 2011, 52, (11), 2061–2066.
