Our recent work has revealed that a hardened layer (H≈13 GPa, E≈230 GPa) with combined improvements in wear and corrosion resistance can be formed on CoCr alloys during plasma surface alloying with carbon. However, the formation mechanism cannot be explained based on current S phase theory for austenitic stainless steels as CoCr alloys normally have a dual phase (fcc and hcp) structure at room temperature. Hence, the present research is directed at advancing scientific understanding of the hardened S phase layers formed in high carbon cast Stellite 21 CoCr alloy. Detailed characterisation has been conducted by glow discharge spectrometry, XRD, SEM/EDX, TEM and nano-indentation. Results have revealed that while the as received Stellite 21 alloy is mainly composed of fcc and hcp phases, the extremely hard surface layer formed on the CoCr alloy during low temperature plasma carburising consists of a carbon supersaturated fcc structured phase, i.e. an S phase, with numerous entangled dislocations and stacking faults. The formation of the S phase could be attributed to the high capability of carbon in stabilising the γ phase and the paraequilibrium nature of the low temperature plasma carburising processes.
MentheE., RieK.-T., SchultzeJ. W. and SimsonS.: ‘Structure and properties of plasma-nitrided stainless steel’, Surf Coat. Technot, 1995, 74–75, 412–416.
5.
MentheE. and RieK.-T.: ‘Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding’, Surf Coat. Technol., 1999, 116–119, 199–204.
6.
YasumaruN.: ‘Nature of YN phase formed with low temperature plasma nitriding of austenitic stainless steels’, Proc. Int. Current Status Semin. on ‘Thermochemical surface engineering of stainless steel‘, Osaka, Japan, November2000, Maney Publishing, 229–246.
7.
OzturkO. and WilliamsonD. L.: ‘Phase and composition depth distribution analyses of low energy, high flux N implante stainless steel’, J. Appl. Phys., 1995, 77, (8), 3839–3850.
8.
WilliamsonD. L., OzturkO., WeiR. and WilburP. J.: ‘Metastable phase formation and enhanced diffusion in fic.c. alloys under high
9.
SinghV., MarchevK., CooperC. V. and MeletisE. I.: ‘Intensified plasma-assisted nitriding of AISI 316L stainless steel’, Surf. Coat. Technol., 2002, 160, (2–3), 249–258.
10.
MarchevK., CooperC. V., BlucherJ. T. and GiessenB. C.: ‘Conditions for the formation of a martensitic single-phase compound layer in ion-nitrided 316L austenitic stainless steel’, Surf. Coat. Technol., 1998, 99, 225–228.
11.
SunY., LiX. Y. and BellT.: ‘X-ray diffraction characterisation of low temperature plasma nitrided austenitic stainless steels’,
12.
SunY., LiX. and BellT.: ‘Low temperature plasma carburising of for improved wear and corrosion resistance’, Surf. Eng., 1999, 15, (1), 49–54.
13.
BuhagiarJ. and DongH.: ‘S-phase in stainless steels’, Proc. Conf. on ‘Surface modification technologies’, Paris, France, September2007, ASM International/IOM Communications Ltd.
14.
LiX.: ‘Characterisation of low temperature plasma nitrided austenitic stainless steels’, PhD thesis, the University of Birmingham, Birmingham, UK, 1999.
15.
ChenJ., LiX. Y., BellT. and DongH.: ‘Improving the wear
16.
LiX. Y., HabibiN., BellT. and DongH.: ‘Microstructural characterisation of a plasma carburised low carbon Co–Cr alloy’, Surf. Eng., 2007, 23, (1), 45–51.
17.
CullityB. D.: ‘Elements of X-ray diffraction’; 1956, London Reading, MA, Addison-Wesley.
18.
CrookP.: ‘Cobalt and cobalt alloys’, 1328; 1992, Materials Park, OH, ASM International.
19.
DongH. and BellT.: ‘An overview of surface hardening of stainless steel’, Proc. Int. Symp. on ‘Advances in surface hardening of stainless steels’, Cleveland, OH, USA, October2007, ASM.
20.
BlaschkoO.: ‘Martensitic phase transformations in alkali metals wrought Co—Cr—Mo alloys‘, ASTM 5TP1365, ASTM, West Conshohocken, PA, USA, 1999, 62–70.
21.
BerlinR. M., GustavsonL. J. and WangK. K.: ‘Influence of post processing on the mechanical properties of investment cast and wrought Co–Cr–Mo alloys’, ASTM STP1365, ASTM, West Conshohocken, PA, USA, 1999, 62–70.
22.
BetteridgeW.: ‘Cobalt and its alloys’; 1982, New York, Chichester, Horwood.
23.
BrooksC. R.: ‘Cobalt-base alloys’, in ‘Heat treatment, structure and properties of nonferrous alloys’, 229–252; 1982, Metals Park, OH, American Society for Metals.
HillertM.: Anyanding av isoaktiva linjer i ternara till—stands—diagram’, Jernkontorets Annaler, 1952, 136, 25–37.
28.
HillertM.: ‘Phase equilibrium, phase diagrams and phase transformation’; 1998, Cambridge, Cambridge University Press.
29.
NowickA. S. and BurtonJ. J.: ‘Diffusion in solids recent developments’, 491; 1975, London, Academic Press.
30.
ColttersR. G.: ‘Thermodynamics of binary metallic carbides: a review’, Mater. ScL Eng., 1985, 76, 1–50.
31.
YasumaruN.: ‘Low-temperature ion nitriding of austenitic stainless steels’, Mater. Trans., 1998, 39, (10), 1046–1052.
32.
ShewmonP.: ‘Diffusion in solids’; 1989, The Minerals, Metals & Materials Society.
33.
WagnerC. N. J., BoisseauJ. P. and AquaE. N.: ‘X-ray diffraction study of plastically deformed copper’, MetalL Soc. Am. Inst. MM., Metall. Petrol. Eng. Trans., 1965, 233, (7), 1280–1286.
