The constitutive and static recrystallisation behaviour of commercially pure Pb and Pb alloys containing 0·1 and 0·2 wt-%Sn has been investigated under conditions of torsion and plane strain compression. It was found that the materials investigated could be used to model the behaviour of hot steels that undergo dynamic restoration processes or static processes in interrupted deformation.
Get full access to this article
View all access options for this article.
References
1.
WONGS. F., HODGSONP. D., CHONGC. J., and THOMSONP. F.: J. Mater. Process. Technol., 1996, 62, 260–274.
2.
WONGS. F., HODGSONP. D., and THOMSONP. F.: J. Mater. Process. Technol., 1995, 53, 601–616.
3.
BARRACLOUGHP. R., WHITTAKERH. J., NAIRK. D., and SELLARSC. M.: J. Test. Eval., 1973, 1, 220–226.
4.
WEISSH., SKINNERD. H., and EVERETTJ. R.: J. Phys. Sci. Instrum., 1973, 6, 709–714.
5.
FIELDSD. S. and BACKOFENW. A.: Proc. AS TM, 1957, 57, 1259–1272.
6.
COOKP. M. and McCRUMA. W.: ‘The calculation of load and torque in hot flat rolling’, 7–12; 1958, London, British Iron and Steel Research Association.
7.
WATTSA. B. and FORDH.: Proc. Inst. Mech. Eng., 1952, Bl,448–453.
8.
LOIZEAUN. and SIMSR. B.: J. Mech. Phys. Solids, 1953, 1, 234–243.
9.
SELLARSC. M., SAHJ. P., BEYNONJ. H., and FOSTERS. R.: ‘Plane strain compression testing at elevated temperatures’, Report on research work supported by SRC grant B/RG/1481, University of Sheffield, England, 1976.
10.
BEYNONJ. H. and SELLARSC. M.: J. Test. Eval., 1985, 13, 28–38.
11.
JONASJ. J., CANOVAG. R., SHRIVASTAVAS. C., and CHRISTODOULOUN.: in ‘Plasticity of metals at finite strain: theory, experiment and computation’, (ed. LeeE. H. and MalletR. L.), 206-222; 1982, Stanford, CA, Stanford University.
12.
RYANN. D., McQUEENH. J., and EVANGELISTAE.: in ‘Annealing processes - recovery, recrystallisation and grain growth’, Proc. 7th Riso Int. Symp. on Metallurgy and Materials Science, (ed. HansenN. et al), 100-105; 1986, Roskilde, Denmark, Riso National Laboratory.
13.
RYANN. D. and McQUEENH. J.: in Proc. 5th Int. Symp. on ‘Plasticity and resistance to deformation’, (ed.BlecieS.), Titograd, Montenegro, April 1986, Ferrous Metallurgy Institute,11–26.
14.
SELLARSC. M.: in Proc. Int. Conf. on ‘Hot working and forming processes, (ed.SellarsC. M. and DaviesG. J.), 3-15; 1980, London, The Metals Society.
15.
SCHLOMCHAKG. G., FENG. A., and KUTSAIV. G.: Izv. VUZ Chernaya Metall., 1980, 5, 61–65.
16.
HODGSONP. D., SZALLAJ. A., and CAMPBELLP. J.: in Proc. 4th Int. Steel Rolling Conf., Deauville, France, 1987, C8.1-C8.13.
17.
CRIADOJ. M. and ORTEGAA.: Acta Metall., 1987, 35, 1715–1721.
18.
ROBERTSW.: Scand. J. Metall., 1980, 9, 13–20.
19.
PRICEC. W.: Scr. Metall., 1985, 19, 669–673.
20.
DOHERTYR. D., ROLLETTA. R., and SROLOVITZD. J.: in ‘Annealing processes - recovery, recrystallisation and grain growth’, Proc. 7th Riso Int. Symp. on Metallurgy and Materials Science (ed. HansenN. et al), 53-67; 1986, Roskilde, Denmark, Riso National Laboratory.
