SmithE and BarnbyJT: ‘Nucleation of grain boundary cavities during high temperature creep’, Met. Sci., 1967, 1, 1–4.
2.
FrancisJA, MazurW, and BhadeshiaHKDH: ‘Review of type IV cracking in ferritic power plant steels’, Mater. Sci. Technol., 2006, 22, 1387–1395.
3.
AbeF, TabuchiM, TsukamotoS and ShiraneT: ‘Microstruture evolution in HAZ and suppression of type IV fracture in advanced ferritic power plant steels’, Int. J. Press. Vessels Pip., 2010, 87, 598–604.
4.
SchlacherC, PelzmannT, BealC, SommitschC, GuptaC, TodaH and MayrP: ‘Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography’, Mater. Sci. Technol., 2015, 31, 516–521.
5.
BurnettTL, GeurtsR, JazaeriH, NorthoverSM, McDonaldSA, HaighSJ, BouchardPJ and WithersPJ: ‘Multiscale 3D analysis of creep cavities in AISI 316 stainless steel’, Mater. Sci. Technol., 2015, 31, 522–534.
6.
JazaeriH, BouchardPJ, HutchingsMT, MamunAA and HeenanRK: ‘Application of small angle neutron scattering to study creep cavitation in stainless steel weldments’, Mater. Sci. Technol., 2015, 31, 535–539.
7.
AbbasiR, DziecolK and BorbelryA: ‘Three-dimensional analysis of creep voids in copper by serial sectioning combined with large field EBSD’, Mater. Sci. Technol., 2015, 31, 540–546.
8.
YardleyVA, FahimiS, and PaytonEJ: ‘Classification of creep crack and cavitation sites in the tempered martensitic ferritic steel microstructure using MTEX toolbox for EBSD’, Mater. Sci. Technol., 2015, 31, 547–553.
9.
YadavSD, SondereggerB, SartoryB, SommitschC and PolettiC: ‘Characterisation and quantification of cavities in a 9Cr martensitic steel for power plants’, Mater. Sci. Technol., 2015, 31, 554–564.
CampbellJ: ‘Cavitation in liquid and solid metals’, Mater. Sci. Technol., 2015, 31, 565–572.
12.
ChapmanNC, SilvaJ, WilliamsJJ, ChawlaN and XiaoX: ‘Characterisation of thermal cycling induced cavitation in particle reinforced metal matrix composites by three dimensional (3D) X-ray synchrotron micro-tomography’, Mater. Sci. Technol., 2015, 31, 573–578.
13.
FerreA, DancetteS, and MaireE: ‘Damage characterisation in aluminium matrix composites reinforced with amorphous metal inclusions’, Mater. Sci. Technol., 2015, 31, 579–586.
14.
SketF, Rodriguez-HortalaM, Molina-AldareguiaJM, LlorcaJ, MaireE and RequenaG: ‘In situ tomographic investigation of damage development in ±45° carbon fibre reinforced laminates’, Mater. Sci. Technol., 2015, 31, 587–593.
15.
GuptaC, van de CasteeleE, WeverM, HoshinoH, KobayashiM, and BiswasA: ‘Quantitative 3D characterisation of porous NiTi fabricated by self-propagating high temperature synthesis using X-ray micro-tomography’, Mater. Sci. Technol., 2015, 31, 594–602.
16.
GuptaC, TodaH, MayrP, and SommitschC: ‘The 3D nature of creep cavitation and its implications for residual life estimation methods in heat resistant steels: a critical review’, Mater. Sci. Technol., 2015, 31, 603–626.
