Organic-based photovoltaics (PV) have attracted increasing attention in recent years and efficiencies exceeding 8% have recently been confirmed. These low cost, lightweight and mechanically flexible devices offer unique advantages and opportunities currently unavailable with crystalline silicon technology. Progress in the field of organic PV has been achieved in part due to the incorporation of transition metal oxides. These offer a wide range of optical and electronic properties, making them applicable in organic-based PV in many capacities. Transparent electrodes can be made from doped metal oxides. The high intrinsic charge carrier mobility of many undoped metal oxides makes them attractive as active materials and charge collectors. Metal oxides can increase the charge selectivity of the electrodes due to the energetic positioning of their valence and conduction bands. Thin films of these materials can manipulate the light distribution inside of organic devices, allowing for improved light harvesting. Metal oxides are stable and can be processed at low temperatures. Consequently, they have been demonstrated as suitable intermediate layer materials in tandem cells. Finally, oxygen-deficient metal oxides can improve the stability of the oxygen- sensitive organic semiconductors. The present work reviews the various applications of metal oxide layers in organic PV devices and summarises the challenges associated with organic/oxide interfaces.
SunS.-S, SariciftciNS: ‘Organic photovoltaics: mechanisms, materials, and devices’, 1st edn; 2005, Boca Raton, FL, Taylor & Francis Group, LLC.
2.
KutscherCF: ‘Tackling climate change in the U.S.: potential carbon emissions reductions from energy efficiency and renewable energy by 2030’, ASES report, American Solar Energy Society, Boulder, CO, USA, 2007.
3.
MackayDJ: ‘Sustainable energy – without the hot air’, Cambridge Limited, Cambridge, UK, 2009.
BoucléJ, RavirajanP, NelsonJ: ‘Hybrid polymer-metal oxide thin films for photovoltaic applications’,J. Mater. Chem., 2007, 17, 3141–3153.
8.
Gonzalez-VallsI, Lira-CantuM: ‘Vertically-aligned nanostrutures of ZnO for excitonic solar cells: a review’,Energy Environ. Sci., 2008, 2, 19–34.
9.
HsuJWP: ‘Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells’, Technical report, Sandia National Laboratories, Albuquerque, NM, USA, 2008.
PeumansP, YakimovA, ForrestSR: ‘Small molecular weight organic thin-film photodetectors and solar cells’,J. Appl. Phys., 2003, 93, (7), 3693–3723.
14.
KietzkeT: ‘Recent advances in organic solar cells’, Adv. OptoElectron., 2007, 2007, 1–15.
15.
AmeriT, DennlerG, LungenschmiedC, BrabecCJ: ‘Organic tandem solar cells: a review’,Energy Environ. Sci., 2009, 2, 347–363.
16.
BeekWJ, SlooffLH, WienkMM, KroonJM, JanssenRA: ‘Hybrid solar cells using a zinc oxide precursor and a conjugated polymer’,Adv. Funct. Mater., 2005, 15, (10), 1703–1707.
17.
KimJY, KimSH, LeeH.-H, LeeK, MaW, GongX, HeegerAJ: ‘New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer’,Adv. Mater., 2006, 18, (5), 572–576.
ChamberlainG: ‘Organic solar cells: a review’,Sol. Cells, 1983, 8, (1), 47–83.
20.
OlsonDC, ShaheenSE, WhiteMS, MitchellWJ, van HestMFAM, CollinsRT, GinleyDS: ‘Band-offset engineering for enhanced open-circuit voltage in polymer-oxide hybrid solar cells’,Adv. Funct. Mater., 2007, 17, (2), 264–269.
21.
LloydMT, LeeY.-J, DavisRJ, FangE, FlemingRM, HsuJWP, ToneyMF: ‘Improved efficiency in poly(3-hexylthiophene)/zinc oxide solar cells via lithium incorporation’,J. Phys. Chem. C: Lett., 2009, 113, (41), 17608–17612.
22.
OlsonDC, JorgeP, CollinsRT, ShaheenSE, GinleyDS: ‘Hybrid photovoltaic devices of polymer and ZnO nanofiber composites’,Thin Solid Films, 2006, 496, 26–29.
23.
GohC, ScullySR, McGeheeMD: ‘Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells’,J. Appl. Phys., 2007, 101, (114503), 1–12.
24.
OlsonDC, ShaheenSE, CollinsRT, GinleyDS: ‘The effect of atmosphere and ZnO morphology on the performance of hybrid poly(3-hexylthiophene)/ZnO nanofiber photovoltaic devices’,J. Phys. Chem. C, 2007, 111C, (44), 16670–16678.
25.
RavirajanP, PeiróAM, NazeeruddinMK, GraetzelM, BradleyDDC, DurrantJR, NelsonJ: ‘Hybrid polymer/zinc oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface layer’,J. Phys. Chem. B, 2006, 110B, 7635–7639.
26.
KislyukVV, DimitrievOP: ‘Nanorods and nanotubes for solar cells’,J. Nanosci. Nanotechnol., 2008, 8, 131–148.
27.
RenX, GershonT, IzaDC, Munoz-RojasD, MusselmanK, MacManus-DriscollJL: ‘The selective fabrication of large-area highly ordered TiO2 nanorod and nanotube arrays on conductive transparent substrates via sol-gel electrophoresis’,Nanotechnology, 2009, 20, 365604.
28.
MusselmanKP, MulhollandGJ, RobinsonAP, Schmidt-MendeL, MacManus-DriscollJL: ‘Low-temperature synthesis of large-area, free-standing nanorod arrays on ITO/glass and other conducting substrates’,Adv. Mater., 2008, 20, 1–6.
29.
ZengT.-W, LoH.-H, ChangC.-H, LinY.-Y, ChenC.-W, SuW.-F: ‘Hybrid poly(3-hexylthiophene)/titanium dioxide nanorods material for solar cell applications’,Sol. Energy Mater. Sol. Cells, 2008, 93, 952–957.
30.
BoucléJ, ChylaS, ShafferMSP, DurrantJR, BradleyDDC, NelsonJ: ‘Hybrid bulk heterojunction solar cells based on blends of TiO2 nanorods and P3HT’,Comptes Rend. Phys., 2008, 9, 110–118.
OlsonDC, LeeY.-J, WhiteMS, KopidakisN, ShaheenSE, GinleyDS, VoigtJA, HsuJWP: ‘Effect of ZnO processing on the photovoltage of ZnO/poly(3-hexylthiophene) solar cells’,J. Phys. Chem. C: Lett., 2008, 112, 9544–9547.
33.
JanottiA, de WalleCGV: ‘Fundamentals of zinc oxide as a semiconductor’,Rep. Prog. Phys., 2009, 72, 126501.
34.
Lira-CantuM, KrebsFC: ‘Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2-TiO2): performance improvement during long-time irradiation’,Sol. Energy Mater. Sol. Cells, 2006, 90, (14), 2076–2086.
HoelCA, MasonTO, GaillardJ.-F, PoeppelmeierKR: ‘Transparent conducting oxides in the ZnO-In2O3-SnO2 system’,Chem. Mater., 2010, 22, 3569–3579.
38.
RaufIA: ‘Structure and properties of tin-doped indium oxide thin films prepared by reactive electron-beam evaporation with a zone-confining arrangement’,J. Appl. Phys., 1996, 79, (8), 4057–4065.
PasquarelliRM, CurtisCJ, MiedanerA, van HestMFAM, O'HayreRP, GinleyDS: ‘Solution synthesis and characterization of indium-zinc formate precursors for transparent conducting oxides’,Inorg. Chem., 2010, 49, 5424–5431.
43.
IrwinMD, BuchholzDB, HainsAW, ChangRPH, MarksTJ: ‘p-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells’,Proc. Natl Acad. Sci. USA, 2008, 105, (8), 2783–2787.
44.
HauSK, YupH.-L, ActonO, BaekNS, MaH, JenK.-Y: ‘Interfacial modification to improve inverted polymer solar cells’,J. Mater. Chem., 2008, 18, 5113–5119.
45.
HuangJ.-S, ChouC.-Y, LiuM.-Y, TsaiK.-H, LinW.-H, LinC.-F: ‘Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods’,Org. Electron., 2009, 10, 1060–1065.
46.
LiuJ, WangS, BianZ, ShanM, HuangC: ‘Organic/inorganic hybrid solar cells with vertically oriented ZnO nanowires’,Appl. Phys. Lett., 2009, 94, 173107.
47.
HanselH, ZettlH, KrauschG, KisselevR, ThelakkatM, SchmidtH.-W: ‘Optical and electronic contributions in double-heterojunction organic thin-film solar cells’,Adv. Mater., 2003, 15, (24), 2056–2060.
48.
TaoC, RuanS, XieG, KongX, ShenL, MengF, LiuC, ZhangX, DongW, ChenW: ‘Role of tungsten oxide in inverted polymer solar cells’,Appl. Phys. Lett., 2009, 94, 043311.
49.
ShrotriyaV, LiG, YaoY, ChuC.-W, YangY: ‘Transition metal oxides as the buffer layer for polymer photovoltaic cells’,Appl. Phys. Lett., 2006, 88, (7), 073508.
50.
HanS, ShinWS, SeoM, GuptaD, MoonS.-J, YooS: ‘Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes’,Org. Electron., 2009, 10, (5), 791–797.
51.
SteirerKX, ChesinJP, WidjonarkoNE, BerryJJ, MiedanerA, GinleyDS, OlsonDC: ‘Solution deposited NiO thin-films as hole transport layers in organic photovoltaics’,Org. Electron., 2010, 11, (8), 1414–1418.
52.
XuY, SchoonenMAA: ‘The absolute energy positions of conduction and valence bands of selected semiconducting minerals’,Am. Miner., 2000, 85, 543–556.
53.
LinY.-Y, ChenC.-W, ChuT.-H, SuW.-F, LinC.-C, KuC.-H, WuJ.-J, ChenC.-H: ‘Nanostructured metal oxide/conjugated polymer hybrid solar cells by low temperature solution processes’,J. Mater. Chem., 2007, 17, 4571–4576.
GilotJ, BarbuI, WienkMM, JanssenRA: ‘The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study’,Appl. Phys. Lett., 2007, 91, 113520.
KuwabaraT, NakayamaT, UozumiK, YamaguchiT, TakahashiK: ‘Highly durable inverted-type organic solar cell using amorphous titanium oxide as electron collection electrode inserted between ITO and organic layer’,Sol. Energy Mater. Sol. Cells, 2008, 92, (11), 1476–1482.
63.
KopidakisN, NealeNR, ZhuK, van de LagemaatJ, FrankAJ: ‘Spatial location of transport-limiting traps in TiO2 nanoparticle films in dye-sensitized solar cells’,Appl. Phys. Lett., 2005, 87, 202106.
64.
MonsonTC, LloydMT, OlsonDC, LeeY.-J, HsuJWP: ‘Photocurrent enhancement in polythiophene- and alkanethiol-modified ZnO solar cells’,Adv. Mater., 2008, 20, 4755.
65.
DunlopL, KursomovicA, MacManus-DriscollJL: ‘Reproducible growth of p-type ZnO:N using a modified atomic layer deposition process combined with dark annealing’,Appl. Phys. Lett., 2008, 93, 172111.
66.
BaileyBA, ReeseMO, OlsonDC, ShaheenSE, KopidakisN, ‘Air-processed organic photovoltaic devices fabricated with hot press lamination’,Org. Electron., 2011, 12, 108–112.
67.
de JongMP, van IJzendoornLJ, de VoigtMJA: ‘Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes’,Appl. Phys. Lett., 2000, 77, 14.
68.
LloydMT, PetersCH, GarciaA, KauvarIV, BerryJJ, ReeseMO, McGeheeMD, GinleyDS, OlsonDC: ‘Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics’,Sol. Energy Mater. Sol. Cells, 2011, 95, 1382–1388.
