In the present work, the authors suggest two methods using the bubble electrospinning to fabricate the aligned nanofibres by changing the collector electrode from a traditional metal plate into a single thin cylindrical metal electrode or two thin cylindrical metal electrodes respectively to collect the produced nanofibres. In the both cases, the aligned nanofibres are fabricated successfully.
TianM., GaoY., LiuY., LiaoY., XuR., HedinN. E. and FongH.: ‘Bis-GMA/TEGDMA dental composites reinforced with electrospun nylon 6 nanocomposite nanofibers containing highly aligned fibrillar silicate single crystals’, Polymer, 2007, 48, (9), 2720–2728.
6.
BergshoefM. M. and VancsoG. J.: ‘Transparent nanocomposites with ultrathin, electrospun nylon-4,6 fiber reinforcement’, Adv. Mater., 1999, 11, (16), 1362–1365.
7.
SawickaK., GoumaP. and SimonS.: ‘Electrospun biocomposite nanofibers for urea biosensing’, Sens. Actuators B, 2005, 108B, (1-2), 585–588.
8.
LiC., VepariC., JinH. J., KimH. J. and KaplanD. L.: ‘Electrospun silk-BMP-2 scaffolds for bone tissue engineering’, Biomaterials, 2006, 27, (16), 3115–3124.
9.
SuiG., YangX., MeiF., HuX., ChenG., DengX. and RyuS.: ‘Poly-L-lactic acid/hydroxyapatite hybrid membrane for bone tissue regeneration’, J. Biomed. Mater. Res. A, 2007, 82A, (2), 445–454.
10.
NerurkarN. L., ElliottD. M. and MauckR. L.: ‘Mechanics of oriented electrospun nanofibrous scaffolds for annulus fibrosus tissue engineering’,. Orthop. Res., 2007, 25, 1018–1028.
11.
PrabhakaranM. P., VenugopalJ., ChyanT. T., HaiL. B., ChanC. K., TangA. L. Y. and RamakrishnaS.: ‘Electrospun bio-composite nanofibrous scaffolds for neural tissue engineering’, Tissue Eng. A, 2008, 14A, (11), 1–11.
12.
PanH., LiL., HuL. and CuiX.: ‘Continuous aligned polymer fibers produced by a modified electrospinning method’, Polymer, 2006, 47, (14), 4901–4904.
13.
KattaP., AlessandroM., RamsierR. D. and ChaseG. G.: ‘Continuous electrospinning of aligned polymer nanofibers onto a wire drum collector’, Nano Lett., 2004,4, (11), 2215–2218.
MathewG., HongJ. P., RheeJ. M., LeoD. J. and NahC.: ‘Preparation and anisotropic mechanical behavior of highly-oriented electrospun poly(butylene terephthalate) fibers’, J. Appl. Polym. Set, 2006, 101, (3), 2017–2021.
16.
LiD., WangY. L. and XiaY. N.: ‘Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays’, Nano Lett., 2003,3, (8), 1167–1171.
17.
XinY., HuangZ., ChenJ., WangC., TongY. and LiuS.: ‘Fabrication of well-aligned PPV/PVP nanofibers by electrospin-ning’, Mater. Lett., 2008, 62, (6-7), 991–993.
18.
LiD., WangY. L. and XiaY. N.: ‘Electrospinning nanofibers as uniaxially aligned arrays and layer-by-layer stacked films’, Adv. Mater., 2004, 16, (4), 361–366.
19.
JaliliR., MorshedM., AbdolkarimS. and RavandiH.: ‘Fundamental parameters affecting electrospinning of PAN nano-fibers as uniaxially aligned fibers’, J. Appl. Polym. Sci., 2006, 101, (6), 4350–4357.
20.
IshiiY., SakaiH. and MurataH.: ‘A new electrospinning method to control the number and a diameter of uniaxially aligned polymer fibers’, Mater. Lett., 2008, 62, 3370–3372.
21.
TeoW. E. and RamakrishnaS.: ‘Electrospun fibre bundle made of aligned nanofibres over two fixed points’, Nanotechnology, 2005, 16, 1878-188
4.
22.
DaltonP. D., KleeD. and MollerM.: ‘Electrospinning with dual collection rings’, Polymer, 2005, 46, (3), 611–614.
23.
DerschR., LiuT., SchaperA. K., GreinerA. and WendorffJ. H.: ‘Electrospun nanofibers: internal structure and intrinsic orienta-tion’, J. Polym. Sci. A, 2003, 41A, (4), 545–553.
24.
KameokaJ. and CraigheadH. G.: ‘Fabrication of oriented polymeric nanofibers on planar surfaces by electrospinning’, Appl. Phys. Lett., 2003, 83, (2), 371–373.
25.
KameokaJ., OrthR., YangY. N., CzaplewskiD., MathersR., CoatesG. W. and CraigheadH. G.: ‘A scanning tip electrospinning source for deposition of oriented nanofibres’, Nanotechnology, 2003, 14, (10), 1124–1129.
26.
WuY.: ‘Research on the jet instability of magneto-electrospinning’, PhD thesis, Donghua University, Shanghai, China, 2007.
27.
WuY., YuJ.-Y., HeJ.-H. and WanY.-Q.: ‘Controlling stability of the electrospun fiber by magnetic field’, Chaos Solitons Fractals, 2007, 32, (1), 5–7.
28.
LiuY. and HeJ.-H.: ‘Bubble electrospinning for mass pro-duction of nanofibers’, Int. J. Nonlinear Set, 2007, 8, (3), 393–396.
29.
LiuY., HeJ.-H., XuL. and YuJ.-Y.: ‘The principle of bubble electrospinning and its experimental verification’, J. Polym. Eng., 2008, 28, (1-2), 55–66.
30.
LiuY., HeJ.-H. and YuJ.-Y.: ‘Bubble-electrospinning: a novel method for making nanofibers’, J. Phys., Conf. Ser., 2008, 96, 012001.
31.
LiuY., DongL., FanJ., KangW.-M., WangR., XuL., ChengB.-W., J.-y. Yu,‘A mathematical model for bubble electro-spinning’, Nonlinear Sci. Lett. A, 2010, 1, (3), 239–244.
