Abstract
The influences of alloying elements on chemical composition of non-metallic inclusions, impact toughness and microstructure in weld metals of high strength low alloy steels have been studied. Results indicated that microstructure had changed from a mixture of acicular ferrite, proeutectoid ferrite, ferrite side plates and microphases to a mixture of acicular ferrite, bainite and microphases due to the addition of Mn and Ti. The impact toughness of weld metal was improved correspondingly. The volume fraction and composition of inclusions both influenced the proportion of acicular ferrite. Mn and Si based oxide globular inclusions located at the boundary of acicular ferrite plates in the weld metal produced using C–Mn–Si–Cu wire. When Mn and Ti were added to welding wires, the inclusions within acicular ferrite plates permitted fewer primary acicular ferrite plates to grow into relatively larger dimensions. Secondary acicular ferrites nucleating on pre-existing ferrite plates refined microstructure effectively.
Get full access to this article
View all access options for this article.