Abstract
In situ high speed IR thermographs captured during laser surface melting of A319 enabled estimation of maximum temperature, temperature gradient and cooling rate. In light of limited spatial and time resolutions of the IR camera, a one-dimensional heat transfer model was adopted for estimating the cooling rate. The cooling rate so estimated provided a range of cell size that closely matched with the experimentally observed cell size.
Get full access to this article
View all access options for this article.
References
1.
KEARNEY
A. L.
: ‘ASM handbook’, Vol. 2 , ‘Properties and selection of nonferrous alloys and special-purpose materials’, 152-177; 2000, Materials Park, OH, ASM International.
2.
CLARICE
J.
and
SARICAR
A. D.
Wear , 1979 , 54 , 7 –16 .
3.
PRASADA RAO
A. K.
,
DAS
K.
,
MURTY
B. S.
and
CHAICRABORTY
M.
Wear, In press.
4.
PETTIT
F. S.
: ‘ASM handbook’, Vol. 5 , ‘Surface engineering’, 10th edn, 784-804; 1996, Materials Park, OH, ASM International.
5.
TOMIDA
S.
,
NAKATA
K.
,
SHIBATA
S.
,
ZENKOUJI
I.
S. SAJE Surf Coat. Technol, 2003, 169-170, 468 –471 .
6.
DUTTAMAJUMDAR
J.
,
GALUN
R.
,
MORDIICE
B. L.
and
MANNA
I.
Mater. Sci Eng. , 2003 , A361 , 119 –129 .
7.
ROSENTHAL
D.
: Weld J, 1941, (Suppl. 20), 220 –234 .
8.
ROSENTHAL
D.
: Trans. Am. Soc. Mech. Eng ., 1946 , 68 , 849 .
9.
CARSLAW
H. s.
and
JAEGER
J. c.
‘Conduction of heat in solids’, 1962, Oxford, Clarendon Press.
10.s. xou and R. MEHRABIAN (eds): ‘Modeling of casting and welding processes III’ ; 1986, Warrendale, PA, TMS.
11.
MAZUMDER
J.
: ‘High power lasers’ , SPIE , 1987 , 801 , 228 –241 .
12.
MIYAZZAKI
T.
and
GIEDT
W. H.
Int. J. Heat Mass Transfer , 1982 , 25 , 807 — 814.
13.
KLEMENS
P. G.
: J. Appl. Phys ., 1976 , 47 , 2165 –2174 .
14.
NAYAK
s.
: ‘Laser induced surface modification of aluminum alloys’, PhD dissertation, The University of Tennessee, TN, USA, 2004.
15.
SPEAR
R. E.
and
GARDNER
G. R.
Trans. Am. Foundrymen's Soc ., 1963 , 71 , 209 –215 .
16.
NAYAK
S.
,
REISTER
L.
and
DAHOTRE
N. B.
J. Mater. Res ., 2004 , 19 , 202 –207 .