The pulse electric current sintering (PECS) of TiB2 powders has been investigated. The spark effect and current skin effect were observed during sintering, but the degree to which they affect samples is determined by heating rates. The production of ‘spark’ during PECS is favoured for higher heating rates, whereas the current skin effect is more evident at lower heating rates.
GAOL., WANGH. Z., HONGJ. S., MIYAMOTOH. and MIYAMOTOK.: J. Eur. Ceram. Soc., 1999, 19, 609–613.
2.
YOSHIMURAM., OHJIT. and SANDOM.: Mater. Lett., 1999, 38, 18–21.
3.
OHTSUKAA., KAWASAKIA. and WATANABER.: J. Jpn. Soc. Powder Powder Metall., 1998, 45, 220–224.
4.
TOKITAM.: Mater. Scl Forum, 1999, 308, 83.
5.
RISBUDS. H., GROZAJ. R. and KIMM. J.: Philos. Mag. B, 1994,69, 525.
6.
OMORIM.: Jpn. Soc. Powder Powder Metall, 1998,45, 1055 (in Japanese).
7.
ISHIYAMAM.: in Proc. 1993 Powder Metallurgy World Congress, Kyoto, Japan, (ed.BandoY. and KosugeK.), 931; 1993, Japan Society of Powder and Powder Metallurgy.
8.
MATSUGIK.HATAYAMAT. and YANAGISAWAO.: J. Jpn. Inst. Met., 1995, 59, 740 (in Japanese).
9.
KIMH., KAWAHARAM. and TOKITAM.:Jpn. Soc. PowderPowder Metall., 2000, 47, 887.
10.
ZHANGD. M., PANGT. T., TANGT. and FUZ.Y.: Chin. J. Mater. Res., 2001, 15, 484 (in Chinese).
11.
ZHANGD. M., PANGT. T., TANGT. and FUZ.Y.: Inorg. Mater., 2001, 16, 872 (in Chinese).
12.
QUANZ. S.: ‘Theory of electric magnetic field’, 214–217; 1990, Beijing, Electronic and Technology University Press (in Chinese).
