Microstructural changes upon retrogression, and retrogression and reaging (RRA) treatment to 8090 Al – Li – Cu – Mg – Zr alloy in the peak aged (T8) temper have been studied by XRD and TEM. The variation of hardness with retrogression, and retrogression and reaging (RRA) has been measured to assess RRA behaviour. XRD studies exhibited all the phases that would be expected in the system. Retrogression primarily caused dissolution of matrix strengthening δ’ precipitates in the solution. Reaging the retrogressed state caused reprecipitation of the δ’ precipitates in the matrix. Retrogression and reaging (RRA) treatments retained the strength of the conventional peak aged temper, but TEM observations revealed some microstructural changes, such as growth of δ’, T1 and S’ phases, reduction of the dislocation densities, and generation of more dislocation loops and helices.
DAVISJ. R. and DAVIS ASSOCIATES (eds) ‘ASM specialty handbook, aluminum lithium alloys’, 1989, Ohio, ASM International.
2.
HARRISS. J., NOBLEB. and DINSDALEK.: Proc. 2nd Int. Conf. on ‘Aluminium — lithium alloys’, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 219-235; 1983, Warrendale, PA, TMS-AIME.
3.
CHRISTODOULOUL., STRUBLEL. and PICKENSJ. R.: Proc. 2nd Int. Conf. on ‘Aluminium-lithium alloys II’, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 561-579; 1983, Warrendale, PA, TMS-AIME.
4.
HOLROYDN. J. H., GRAYA., SCAMANSG. M. and HERMANNR.: Proc. 3rd Int. Conf. on ‘Aluminium-lithium alloys III’, (ed.BakerC. et al.), 310-320; 1985, London, The Institute of Metals.
5.
BINSFELDF., HABASHIM., GALLANDJ., FIDELLEJ. P., MIANNAYD. and ROFIDALP.: Proc. 4th Int. Conf. on ‘Aluminium-lithium alloys IV’, (ed. G. Champier etal.), Paris, June 1987, J. de Phys. Colloque, 1987, 48, C3: 587–596.
6.
CINAB.: Pat. 3856584, US Patent Office, Washington, DC, December 24, 1974.
7.
CINAB. and RANISHB.: Paper No. XXV, Aluminium Industrial Products, ASM, Pittsburgh, PA, USA, October 1974.
8.
RAJANK., WALLACEW. and BEDDOESJ. C.: J. Mater. Sci., 1982, 17, 2817–2824.
9.
DANHN. C., RAJANK. and WALLACEW.: Metall. Trans. A, 1983, 14A, 1843–1850.
10.
ISLAMM. U. and WALLACEW.: Met. Technol, 1983, 10, 386–392.
11.
KOMISAROVV., TALIANKERM. and CINAB.: Mater. Sci. Eng. A, 1996, A221,113–121.
12.
KANNOM., ARAKII. and QUIC.: Mater. Sci Technol, 1994, 10, 599–603.
13.
GREGSONP. J. and FLOWERH. M.: J. Mater. Sci. Lett., 1984, 3, 829–834.
14.
MIYASATOS. and THOMASG.: Proc. 5th Int. Conf. on ‘Aluminium-lithium alloys V’, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 633-640; 1989, Warley, UK, Materials Component Engineering Publications Ltd.
15.
GREGSONP. J., FLOWERH. M., TITEC. N. J. and MUKHOPADHYAYA. K.: Mater. Sci Technol, 1986, 2, 349–353.
16.
WATKINSONR. C. and MARTINJ. W.: Mater. Charact., 1994, 33, 11–19.
17.
KUMARK. S., BROWNS. A. and PICKENSJ. A.: Acta Mater., 1996, 44, 1899–1915.
18.
MILLERW. S., WHITEJ. and LLOYDD. J.: Proc. 4th Int. Conf. on ‘Aluminium-lithium alloys IV’, (ed. ChampierG. et al.), Paris, June 1987, J. de Phys. Colloque, 1987, 48, C3: 131–149.
19.
THAKURC. and BALASUBRAMANIAMR.: Acta Mater., 1997, 45, 1323–1332.
20.
HUZ. Q., ZHANGY., LIUY. L. and ZHUz. Y.: Corrosion, 1993, 20, 491–498.
21.
JENSRUDO. and RYUMN.: Mater. Sci Eng., 1984, 64, 229–236.
22.
FOXS., FLOWERH. M. and MCDARMAIDD. C.: Proc. 3rd Int. Conf. on ‘Aluminium-lithium alloys III’, (ed.BakerC. et al.), 263-272; 1985, London, The Institute of Metals.
23.
HALLM. B. and MARTINW.: Z Metallkd., 1994, 85, 134–139.
24.
WALLACEW., BEDDOESJ. C. and MALHERBEM. C. DE: Can. Aeron. Space J, 1981, 27, 222–232.
25.
PARKJ. K.: Mater. Sci. Eng. A, 1988, A103,223–131.
26.
KANEKOB. S.: Met. Frog., 1980, 118, 41–43.
27.
RICKERR. E., FINKJ. L. and VASUDEVANA. K.: Metall Trans. A, 1993, 22A, 264–267.
28.
BLANKENSHSHIPC. P.JR and E. A. STARKE JR: Metall Trans. A, 1993, 24A,833–841.
29.
TALIANKERM. and CINAB.: Metall Trans. A, 1989, 20A, 2087–2092.
30.
VASUDEVANA. K. and DOHERTYR. D.: Acta Met., 1987, 35, 1193–1219.
31.
SATYAPRASADK., GOKHALEA. A., MUKHOPADHYAYA. A., BANERJEED. and GOELD. B.: Acta Mater., 1999, 47, 2581–2592.
32.
GOMIEROP., LIVETF., BRECHETY. and LOUCHETF.: Acta Metall. Mater., 1992, 40, 847–855.
33.
GUPTAA. K., GAUNTP. and CHATURVEDIM. C.: Philos. Mag., 1987, 55, 375–387.
34.
SATYAPRASADK., MUKHOPADHYAYA. K., BANERJEED. and GOELD. B.: Scr. Metall., 1994, 30, 1299–1304.
35.
ABISS., EVANGELISTAE., MENGUCCIP. and RIONTINOG.: Proc. 5th Int. Conf. on ‘Aluminium-lithium alloys V’, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 681-690; 1989, Warley, UK, Materials Component Engineering Publications.
36.
RYUMN.: Acta Metall., 1969, 17, 269.
37.
FLOWERH. M. and GREGSONP. J.: Mater. Sci Technol, 1987, 3, 81–90.
38.
NESE.: Acta Metall., 1972, 20, 499.
39.
GAYLEF. W. and VANDERSANDEJ. B.: Scr. Metall., 1984, 18, 473–478.
40.
GAYLEF. W. and VANDERSANDEJ. B.: Proc. 3rd Int. Conf. On ‘Aluminium-lithium alloys III’, (ed. C. Baker etal.), 376-385; 1985, London, The Institute of Metals.
41.
GAYLEF. W. and VANDERSANDEJ. B.: Proc. Int. Conf. On ‘Aluminium alloys-their physical and mechanical properties’, (ed.StarkeE. A. and SandersT. H.), Vol. II, 727; 1986, Warley, Engineering Materials Advisory Service.
