Abstract
The influence of the addition of Al-1B master alloy on the microstructure and mechanical properties of Al-11.6%Si-0.4%Mg alloy modified with 0.030%Sr has been investigated. The mechanical properties and fracture behaviour of the alloys as cast and after T6 heat treatment with three different melt treatments (no treatment; 0.030%Sr modifying treatment; and 0.030%Sr + 0.028%B combined melt treatment) were also compared. Al-1B master alloy has a strong action in refining the dendritic structure in near eutectic Al-Si casting alloys modified with Sr. The Sr+B combined melt treatment can improve considerably the mechanical properties of the alloys, both as cast and after T6 heat treatment. Fracture modes of the alloys with the Sr modifying treatment and the Sr+B combined melt treatment are typically ductile. However, fractographs indicate that the alloy with combined melt treatment suffered greater ductile deformation before fracture. The Sr+B combined melt treatment significantly improves the mechanical properties of near eutectic Al-Si casting alloys.
Get full access to this article
View all access options for this article.