A laboratory study was carried out to determine the characteristics of austenite grain growth and recrystallisation, strain induced precipitation, and continuous cooling transformation kinetics for two microalloyed medium carbon steels (1541 + Ti,V and 1541 + Nb). Austenite grain refinement is achieved by a combination of undissolved carbonitride precipitates at the reheat temperature, deformation recrystallisation at temperatures above TNR and strain induced carbonitride precipitation. Deformation below TNR promotes transformation to grain boundary ferrite (GBF), intragranular ferrite (IGF), and pearlite (P) at the expense of bainite (B) in both steels. This is attributed to increased density of nucleation sites for ferrite and pearlite at austenite grain boundaries, twin boundaries, and deformation bands. The results suggest that thermomechanical forging schedules could be designed to produce refined F + P microstructure, and hence, to realise improved strength, toughness, and machinability in the forging.
TYNEC. J. VAN, KRAUSSG. and D. K. MATLOCK (eds): ‘Fundamentals and applications of microalloying forging steels’: 1996, Warrendale, PA, TMS.
3.
GLADMANT.: ‘The physical metallurgy of microalloyed steels’: 1997, London, The Institute of Materials.
4.
BOYDJ. D. and ZHAOP.: ‘42nd Mechanical working and steel processing conf. proc.’, Toronto, ON, October 2000, ISS,799–810.
5.
LEED. L., YOOS. J., ANK. S., LEEY. W. and CHOOW. Y.: in ‘Fundamentals and applications ofmicroalloying forging steels’, (ed. C. J. Van Tyne et al), 17-28; 1996, Warrendale, PA, TMS.
6.
TITHERG., CAMERONT. B. and DIESBURGD. E.: in ‘Fundamentals of microalloying forging steels’, (ed.KraussG. and BanerjiB. K.), 269-290; 1987, Warrendale, PA, TMS.
7.
KASPARR. and MAHIVIOUDN.: Mater. Sci. TechnoL, 1991, 7, 294–254.
8.
CABRERAJ. M., OMARA. AL and PRADOJ. M.: J. Mater. Sci., 1996, 31, 1303–1309.
9.
CUDDYL. J. and RALEYC.: Metall. Trans. A, 1983, 14A, 1989–1995.
10.
CAIG. and BOYDJ. D.: in ‘Grain growth in polycrystalline materials III’, (ed.WeilandH. et al), 579-585; 1998, Warrendale, PA, TMS.
11.
PRIKRYLM., KROUPAA., WEATHERLYG. C. and SUBRAMANIANS. V.: Metall. Mater. Trans. A, 1996, 27A, 1149–1165.
12.
THOMPSONS. W. and KRAUSSG.: Metall. Trans. A, 1989, 20A, 2279–2288.
13.
DUTTAB. and SELLARSc. M.: Mater. Sci. Technol, 1987,3, 197–206.
14.
EDMONDSD. V.: in ‘Fundamentals and applications of micro-alloying forging steels’, (ed. C. J. Van Tyne et al), 111-125; 1996, Warrendale, PA, TMS.
15.
LEAPM., BROWNE. L., MAZZAREP. and KRAUSSG.: in ‘Fundamentals of microalloying forging steels’, (ed.KraussG. and BanerjiB. K.), 91-111, 1987, Warrendale, PA, TMS.
16.
CARCIA-MATEOC., LOPEZB. and RODRIGUEZ-IBABEJ. M.SCr. Mater., 2000, 42, 137–143.
17.
QUISPEA., MEDINAS. F. and VALLESP.: Int Int., 1997, 37, 783–788.
18.
KUZIAKR. M. and CHENGY. W.: in ‘Processing, microstructure and properties of microalloyed and other modern high strength low alloy steels’, (ed.DeArdoA. J.), 51-64; 1992, Warrendale, PA, ISS.
19.
ZHANGF. and BOYDJ. D.: in ‘Fundamentals and applications of microalloying forging steels’, (ed. C. J. Van Tyne et al), 127-141; 1996, Warrendale, PA, TMS.
20.
LIUT. and BOYDJ. D.: ‘Thermomechanical processing: mechanics, microstructure and control’, (ed.PalmiereE. J. et al.), 353-358; 2003, Sheffield, University of Sheffield.
21.
ROBERTSW., SANDBERGA., SIWECKIT. and WERLEFORST.Proc. Int. Conf. on ‘HSLA steels technology and applications’, Philadelphia, PA, October 1983, ASM,67–84.
22.
SELLARSC. M.: Proc. Conf. on ‘Hot working and forming process’, Sheffield, UK, July 1979, The Metals Society,3–15.
23.
PARKS. H. and JONASJ. J.: in ‘Mathematical modeling of hot rolling of steel’, (ed.YueS.), 446-456; 1990, Montreal, QC, CIM.
24.
DUTTAB., PALMIEREE. J. and SELLARSC. M.: Acta Mater., 2001, 49, 785 — 794.
25.
JONASJ. J. and WEISSI.: Met. Sci., 1979, 13, 238–245.
26.
AMINR. K. and PICKERINGF. B.: in ‘Thennomechanical processing of microalloyed austenite’, (ed.DeArdoA. J. et al), 377-403; 1982, Warrendale, PA, TMS-AIME.
27.
SANDBERGA. and ROBERTSW.: in ‘Thennomechanicalprocessing of microalloyed austenite’, (ed.DeArdoA. J. et al), 405-431; 1982, Warrendale, PA, TMS-AIME.
28.
SENS. and PRIESTNERR.: Trans Indian Inst. Met., 1984,37, 485 — 490.
29.
HANZAKIA. Z., YUES. and HODGSONP. D.: ‘33rd Mechanical working and steel processing conf. proc.’, St. Louis, MO, USA, October 1991, ISS,459–466.
30.
BASUKIA. and AERNOUDTE.: SCr. Mater., 1999,40, 1003–1008.
31.
KHLESTOVV. M., KONOPLEVAE. V. and MCQUEENH. J.: Can. Metall. Q., 2001, 40, 221 — 233.
32.
HANLOND. N.SIETSMAJ. and ZWAAGS. VAN DER: ISIJ Int, 2001, 41, 1028–1036.
33.
HURLEYP. J. and HODGSONP. D.: Mater. Sci. TechnoL, 2001, 17, 1360–1368.
34.
ISHIKAWAF., TAKAHASHIT. and OCHIT.: Metall Mater. Trans. A, 1994, 25A, 929–936.
35.
ZHAOP. and BOYDJ. D.: in ‘HSLA steels ‘2000’, (ed.LiuG. et al), 127-132; 2000, Beijing, Chinese Society for Metals.
36.
NADKARNIG., MCCORMICKM. and BOYDJ. D.: in ‘Processing, microstructure and properties of microalloyed and other modern high strength low alloy steels’, (ed.DeArdoA. J.), 235-245; 1992, Warrendale, PA, ISS.
37.
BENGOCHEAR., LOPEZB. and GUTIERREZI.: Mater. Sci. Forum, 1998, 284-286,201–208.
