A three-dimensional cellular automaton–finite element model has been developed over the past five years for the prediction of macrostructures formed in casting. The present article briefly summarises the growth algorithm of the model. Applications are then given for the prediction of the grain structure formed in a directionally solidified turbine blade produced by investment casting, a continuously cast cylinder, and a near net shape steel sheet obtained by twin roll strip casting.
Get full access to this article
View all access options for this article.
References
1.
RAPPAZM.GANDINCH.—A., DESBIOLLESJ.—L., and THEVOZPH.: Metall. Trans. A, 1996, 27A, 695.
2.
GANDINCH.—A., DESBIOLLESJ.—L., RAPPAZM., and THEVOZPH.: Metall. Mater. Trans. A, 1999, 30A, 3153.
3.
KURZW., GIOVANOLAB., and TRIVEDIR.: Acta Metall., 1986, 34, 823.
4.
RAPPAZM.: Int. Mater. Rev., 1989, 34, 93.
5.
WANGC. Y. and BECKERMANC.: Metall Mater. Trans. A, 1996, 27A, 2754.
6.
CH.—A. GANDIN and M. RAPPAZ : Acta Mater., 1997, 45, 2187.
7.
TAKATANIH.GANDINCH.—A., and RAPPAZM.: Acta Mater., 2000, 48, 675.
8.
GANDINCH.-A., RAPPAZM., WESTD., and ADAMSB. L.: Metall Trans. A, 1995, 26A, 1543.
9.
CARTERP., COXD. C., GANDINCH.—A., and REEDR. C.: Mater. Scl Eng. A, 2000, A280, 233–246.
10.
GANDINCH.A., JALANTIT., and RAPPAZM.: in ‘Modeling of casting, welding and advanced solidification processes VIII’, (ed. BeckermannC. and ThomasB.) 363; 1998, Warrendale, PA, TMS.
