Abstract
Low density, high modulus, and potentially improved wear resistance are the major benefits of a ferrous composite material. A BS S.156 (4%NiCrMo)gear steel reinforced with 15 vol.-% titanium diboride particles has been demonstrated for possible high performance structural applications. This composite has been produced by a powder metallurgy/mechanical milling processing route, to give a homogeneous distribution of fine reinforcement particles. The composite tensile strength was 90% of the matrix in the fully heat treated condition, with ductility of up to 6%. However, martensite formation and hence the hardenability was found to be suppressed in the composite. A fatigue study indicated that the titanium diboride particles did not appear to contribute to crack initiation in the composite.
Get full access to this article
View all access options for this article.