Abstract
In this study, commercial VANADIS 4 (V-4) tool steel powders were classified by sifting, which was previously the matrix, and fine TiC powder was used as an additive to produce a new material with high hardness and wear resistance, via powder metallurgy and a sintering process. Experimental results showed that the transverse rupture strength of the original V-4 steel powder was 678·5 MPa and was enhanced to 868·6 MPa below 25 μm, after the addition of 35 wt-%TiC powders through sintering at 1400°C. In addition, the hardness increased to 86·2 HRA, transverse rupture strength reached 1059·3 MPa and porosity decreased to 1·2% of the V-4 steel powders (below 25 μm) added with 35 wt-%TiC after sintered at 1400°C and annealed at 850°C, followed by quenching at 1030°C and tempering at 200°C.
Get full access to this article
View all access options for this article.