Abstract
The cold compaction and vacuum sintering behaviour of a Ti powder and a Ti hydride powder were compared. Master sintering curve models were developed for both powders. Die ejection force, green strength and green porosity were lower for hydride powder than for Ti powder, all probably resulting from reduced cold welding and friction during compaction. For sintering temperatures above ∼1000°C, most of the difference in the sintered density of Ti and hydride is explained by assuming equal densification, while taking into account the lower green porosity of compacts made from hydride powder. However, there is evidence that particle fracture during compaction also contributes to increased sintered density for hydride powder. The Ti powder conformed to a master sintering curve model with apparent activation energy of 160 kJ mol−. The activation energy for Ti hydride also appeared to be about 160 kJ mol−, but the model did not fit the experimental data well.
Get full access to this article
View all access options for this article.