Microstructural development during liquid phase sintering of Fe and Fe–Mo alloys containing elemental boron additions

Abstract

The sintering behaviour of Fe and Fe–Mo prealloyed powder compacts containing from 0·5 to 3·5 wt-%Mo and fixed boron additions has been studied with special emphasis on the microstructural development, the formation of the liquid phase and the liquid phase sintering mechanisms involved during the densification process. The basic phenomena involving the formation of a liquid phase and the temperature at which the liquid is generated is strongly influenced by the Mo/B ratio in the initial powder mixture. The effect produced by Mo and its concentration, both, on the final microstructure and on the behaviour of boron prior to, during and after the formation of the liquid phase, was studied under both the optical and the scanning electron microscope. For this purpose interrupted sintering experiments followed by water quenching from specific temperatures and times within the sintering cycle have been carried out. The study shows that the formation of a liquid phase is preceded by noticeable enhancement of solid state sintering at intermediate temperatures. This is accompanied by boron diffusion into the metallic particles, generating inter- and intragranular precipitates in amounts dependent on the Mo concentration. At a later stage boron is found to be preferentially located at the boundaries as the formation of a continuous Fe/Mo/B liquid phase with excellent wetting characteristics proceeds thus producing densification by pore filling and shape accommodation. Final densities up to 7·82 g cm⁻³ were obtained for these alloys.