Densification behaviour of titanium alloy powder was investigated under hot isostatic pressing. Experimental data were obtained for titanium alloy powder at various pressures and temperatures during hot isostatic pressing. The densification model of Abouaf and co-workers under power law creep was implemented into a finite element analysis program (Abaqus) to compare with experimental data. The agreements between finite element calculations and experimental data for densification of titanium alloy powder were good during hot isostatic pressing. Finite element calculations for the shape change and density distribution of a sample were also compared with experimental data.
Get full access to this article
View all access options for this article.
References
1.
BlenkinsopP. A., EVANSW. J., and FLOWERH. M.: ‘Titanium ‘95 science and technology — proceeding of the eighth world conference on titanium’, 1996, London, The Institute of Materials.
2.
FroesF. H. and EYLOND.: Int. Mater. Rev., 1990, 35, 162–182.
BessonJ. and ABOUAFM.: Int. J. Solids Struct., 1991, 28, 691–702.
5.
BouvardD. and LAFERM.: ‘Advances in powder metallurgy’, Vol. 1, 491–503; 1989, Princeton, NJ, MPIF.
6.
AbondanceD., DELLISC., BACCINOR., BERNIERF., MORETF., MONICAULTJ. M. DE, GUICHARDD., and STUTZP.: ‘Titanium ‘95 science and technology — proceeding of the eighth world conference on titanium’, 2634-2640; 1996, London, The Institute of Materials.
7.
KimK. T. and JEONY. C.: Mater. Sci. Eng. A, 1998, A245, 64–71.
8.
JeonY. C. and KIMK. T.: Int. J. Mech. Sci., 1999, 41, 815–830.
9.
AbouafM., CHENOTJ. L., RAISSONG., and BAUDUINP.: Int. J. Num. Meth. Eng., 1988, 25, 191–212.
10.
KuhnL. T. and McMEEKINGR. M.: Int. J. Mech. Sci., 1992, 34, 563–573.
11.
SofronisP. and McMEEKINGR. M.: J. Appl. Mech., 1992, 59, S88—S95.
12.
AbondanceD., BACCINOR., BERNIERF., MORETF., MONICAULTJ. M. DE, GUICHARDD., STUTZP., and BOUVARDD.: ‘PM ‘94: world congress on powder metallurgy’, 797-800; 1994, Les Ulis, Les Editions de Physique.
13.
KimJ. H., HAND. B., and KIMK. T.: Mater. Sci. Eng. A, 1996, A212, 87–93.
14.
BessonJ. and EVANSA. G.: Acta Metall. Mater., 1992, 40, 2247–2255.
15.
WilkinsonD. S. and ASHBYM. F.: Acta Metall., 1975, 23, 1277–1285.
16.
CanelJ. and BOUVARDD.: ‘Advances in powder metallurgy and particulate materials’, Vol. 2, 47–55; 1996, Princeton, NJ, MPIF.
17.
SanchezL., OUEDRAOGOE., STUTZP., and DELLISC.: Proc. Int. Workshop on ‘Modelling of metal powder forming processes’, Grenoble, France, July 1997, GPM2/3S/CEREM, 295-304.
18.
‘Abaqus User's I, II, andIII Manual’, 1997, Pawtucket, RI, Hibbitt, Karlsson & Sorensen.
19.
BouazizO., DELLISC., and STUTZP.: Proc. Int. Workshop on ‘Modelling of metal powder forming processes’, Grenoble, France, July 1997, GPM2/3S/CEREM, 67-75.
20.
BoyerR., WELSCHG., and COLLINGSE. W.: ‘Materials properties handbook — titanium alloys’, 483-636; 1994, Materials Park, OH, ASM International.
21.
KimK. T. and LEEH. T.: Int. J. Mech. Sci., 1998, 40, 507–519.
22.
XuJ. and McMEEKINGR. M.: Int. J. Mech. Sci., 1992, 34, 167–174.
