This paper is primarlly concerned with the problem of poor performanee of mechanical joints, the main reason for which is inadequacy of published informaiion on joint design, construction procedure, and maintenance. This contention is illustrated by discussion of corrosion problems that arise with mechanical joints, particularly with aluminium-stell joints which are commonly used in shipbuilding.
The need for closer co-operation amongst designers, constructors and corrosion specialists is strongly emphasised. Some methods of making practical corrosion informaiion available to industry are suggested.
Get full access to this article
View all access options for this article.
References
1.
UhligH. L., Corrosion, 1950, 6, 29
2.
VernonW. H J.., ‘The Conservation of National Resources’, 1957, p. 105 (London: Institution of Civil Engineers)
3.
Rules and Regulations for the Construction and Classification of Steel Ships, 1958. Lloyds Register of Shipping, London, 1958
4.
HowardRogers, T., The Marine Corrosion Handbook, 1960, p. 241 (Toronto: McGraw Hill)
5.
WhiteP. E., Anti-Corros. Meth. Mater., 1966, 1, 29
6.
RowlandsJ. C., Corros. Technol., 1959 (Dec.), P. 359
7.
Construction of Small Craft—Code of Recommended Practices for Boats up to 20 Feet in Length(other than Nationally recognised classes), 1963 (London: Ship and Boat Builders National Federation)
8.
GodardH. P., Mater. Prot., 1963, 2, 38–47
9.
BoothF. F., & LatimerK. G., Proceedings Second Inter-national Congress on Metallic Corrosion, 1966, p. 780. National Association of Corrosion Engineers, Houston, Texas
10.
KingcombeJ. C., Corros. Prey. Control, 1956 (June), p. 32
