The Compressibility of the Resin Solid Feed Bed in Extrusion

Tadmor, Z. and I. Klein. Engineering Principles of Plastic Extrusion. Van Nostrand Reinhold Co., Chapter 5 (1970).

Cox, A.D.D. and R.T. Fenner. "Melting Performance in the Single Screw Extrusion of Thermoplastics ," Polymer Engineering and Science, 20(8):562-571 (May 1980).

Pervadchuk, V.P. , N.M. Trufanova and V.I. Yankov. "A Mathematical Model of the Melting of Polymeric Materials in Extruders," Khimicheskie Volokna, 3:51-53 (May-June 1984).

Shapiro, J. , A.L. Halmos and J.R.A. Pearson. "Melting in Single Screw Extruders, Parts I and II," Polymer, 17:905-918 (October 1976).

Halmos, A.L. , J.R.A. Pearson and R. Trottnow. "Melting in Single Screw Extruders, Part III,'' Polymer, 19:1199-1216 (October 1978).

Hisaniko, F. , T Kunio, S. Shinya and A. Nomura. "A Plasticating Model for Single Screw Extruders," Polymer Engineering and Science, 22(9):578-586 (June 1982 ).

Cox, A.P.D. , J.G. Williams and D.P. Isherwood. "The Melting Behavior of a Low Density Polyethylene Powder in a Screw Extruder," Polymer Engineering and Science, 21(2):86-92 (mid-February 1981).

Lindt, J.T. "Pressure Development in the Melting Zone of a Single-Screw Extruder ," Polymer Engineering and Science, 21(17):1162-1166 (mid-December 1981).

Mount, E.M. , III and C.I. Chung. "Melting Behavior of Solid Polymers on a Metal Surface at Processing Conditions," Polymer Engineering and Science, 18(9):711-720 (July 1978 ).

Chung, K.H. and C.I. Chung. "Analytical Melting Model for Extrusion: Stress of Fully Compacted Solid Polymers," Polymer Engineering and Science, 23(4) (March 1983).

Lee, Biing-Lin. "Study of Polymer Powder and Melt Rheology using a Constant Pressure, Non-Isothermal Rheometer," Polymer Engineering and Science, 26(14) (mid-August 1986).