Coating is a process that improves and enhances life, quality and efficiency of the web. Common industrial adhesive application to board and paper, metal foils polymer coatings, photographic film emulsions, recording films, textile fabrics, paints, coating on food items, medicine, catalogues are common examples. There are many fluids that are used as coatings. This paper analyses blade coating using both plane as well as exponential geometries along with slip and magnetohydrodynamics effects for a Carreau fluid model. To study the blade coating phenomenon, slip is introduced at the blade surface and a magnetic field is applied normal to the fluid flow. The LAT (Lubrication approximation theory) has been introduced to convert governing partial differential equations into a simpler form and a numerical solution is obtained by using shooting method. The significant physical quantities like volumetric flow rate, pressure, velocity, load, coated film thickness and pressure gradient are discussed in detail. The effects of power law index, slip parameter, Weissenberg number and Hartmann number on these physical quantities are presented. The observations are depicted in tabular data and in the graphical form as well. The Weissenberg number and Hartmann number play a very important role in controlling the load and coated film thickness.
MugheesMSajidMAliN, et al.Nonisothermal analysis of a couple stress fluid in blade coating process. Polym Eng Sci2020; 60: 1129–1137.
24.
KhaliqSAbbasZ. A theoretical analysis of roll-over-web coating assessment of viscous nanofluid containing Cu-water nanoparticles. J Plast Film Sheeting2020; 36: 55–75.
25.
SajidMMugheesMShahzadH, et al.A theoretical analysis of blade coating for third-grade fluid. J Plast Film Sheeting2019; 35: 218–238.
26.
WangXShahzadHChenY, et al.Mathematical modelling for flexible blade coater with magnetohydrodynamic and slip effects in blade coating process. J Plast Film Sheeting2020; 36: 38–54.
27.
MugheesMSajidMShahzadH, et al.An exact solution for blade coating of a second-grade fluid on a porous substrate. J Plast Film Sheeting2021; 38: 245–262.
28.
KhaliqSAbbasZ. Theoretical analysis of blade coating process using simplified Phan-Thien-Tanner fluid model: an analytical study. Polym Eng Sci2021; 61: 301313.
29.
KhaliqSAbbasZ. Non-isothermal blade coating analysis of viscous fluid with temperature-dependent viscosity using lubrication approximation theory. J Polym Eng2021; 41: 705–716.
30.
AbbasZKhaliqS. Roll-over-web coating analysis of micropolar-Casson fluid: a theoretical investigation. J Polym Eng2021; 41: 289–298.
31.
AbbasZKhaliqS. Variation of coating thickness in blade coating process of an upper-convected Jeffery’s fluid model. Iran Polym J2022; 31: 343–355.
32.
El-SapaSAlsudaisNS. Effect of magnetic field on the motion of two rigid spheres embedded in porous media with slip surfaces. Eur Phys J E2021; 44: 68.
33.
NazeerMAliNJavedT. Natural convection flow of micropolar fluid inside a porous square conduit: Effects of magnetic field, heat generation/absorption and thermal radiation. J Porous Media2018; 21(10): 953–975.
34.
NazeerMAliNJavedT. Numerical simulation of MHD flow of micropolar fluid inside a porous inclined cavity with uniform and non-uniform heated bottom wall. Can J Phys2018; 96(6): 576–593.
35.
NazeerMAliNJavedT. Numerical simulations of MHD forced convection flow of micropolar fluid inside a right angle triangular cavity saturated with porous medium: Effects of vertical moving wall. Can J Phys2019; 97(1): 1–13.
36.
AliNNazeerMJavedT, et al.Finite element analysis of bi-viscosity fluid enclosed in a triangular cavity under thermal and magnetic effects. Eur Phys J Plus (Epjp)2019; 2: 134.
37.
FirdousHHusnineSHussainF, et al.Velocity and thermal slip effects on two-phase flow of MHD Jeffrey fluid with the suspension of tiny metallic particles. Physica Scripta2020; 96: 025803.
38.
NazeerMAliNAhmadF, et al.Effects of radiative heat flux and joule heating on electro-osmotically flow of non-Newtonian fluid: Analytical approach. Int Comm Heat Tran2020; 117: 104744.
39.
Al-ZubaidiANazeerMSubiaGS, et al.Mathematical Modeling and Simulation of MHD Electro-Osmotic Flow of Jeffrey Fluid in Convergent Geometry, Waves in Random and Complex Media, 2021, pp. 1–17.
40.
XuYJNazeerMHussainF, et al.Electro-osmotic flow of biological fluid in divergent channel: drug therapy in compressed capillaries. Scientific Rep2021; 11: 23652.
41.
MahmoodKSajidMAliN, et al.Efects of lubricated surface in the oblique stagnation point fow of a micropolar fuid. Eur Phys J Plus2017; 132: 297.
42.
MahmoodKSajidMSadiqMN, et al.Efects of lubrication on the steady oblique stagnationpoint fow of a couple stress fuids. Phys Astron Int J2018; 2: 389–397.
43.
MahmoodKSadiqMNSajidM, et al.Heat transfer instagnation-point fow of a Jefrey fuid past a lubricated surface. J Braz Soc Mech Sci Eng2019; 41: 65.
44.
SheriefHHFaltasMSEl-SapaS. Pipe flow of magneto-micropolar fluids with slip. Can J Phys2017; 95: 885–893.
45.
SajidMSadiqMNMahmoodK, et al.A Legendre wavelet spectral collocation method for analysis of thermal radiation and slip in the oblique stagnation-point fow of Walters-B liquid towards a stretching surface. Sadhana2019; 44: 136.
46.
SadiqMNSajidMAbbasT, et al.Numerical Simulation for flow and heat transfer of a nanofluid over lubricated stretchable surface. J Nanofluid2022. in press.
47.
WakifA. A Novel Numerical Procedure for Simulating Steady MHD Convective Flows of Radiative Casson Fluids over a Horizontal Stretching Sheet with Irregular Geometry under the Combined Influence of Temperature-Dependent Viscosity and Thermal Conductivity. Math Probl Eng2020; V2020: 1675350–1675420.
48.
NayakM.K.WakifA.AnimasaunI.L, et al.Numerical differential quadrature examination of steady mixed convection nanofluid flows over an isothermal thin needle conveying metallic and metallic oxide nanomaterials: a comparative investigation. Arab J Sci Eng2020; 45: 5331–5346.
49.
WakifA.ChamkhaA.AnimasaunI.L, et al.Novel physical insights into the thermodynamic irreversibilities within dissipative EMHD fluid flows past over a moving horizontal riga plate in the coexistence of wall suction and joule heating effects: a comprehensive numerical investigation. Arab J Sci Eng2020; 45: 9423–9438.
50.
ZaydanM.WakifA.AnimasaunI.L, et al.Significances of blowing and suction processes on the occurrence of thermo-magneto-convection phenomenon in a narrow nanofluidic medium: A revised Buongiorno's nanofluid model. Case Stud Therm Eng2020; 22: 100726.
51.
RasoolGWakifA. Numerical spectral examination of EMHD mixed convective flow of second-grade nanofluid towards a vertical Riga plate using an advanced version of the revised Buongiorno’s nanofluid model. J Therm Anal Calorim2021; 143: 2379–2393.
52.
XiaW-FAnimasaunILWakifA, et al.Gear-generalized differential quadrature analysis of oscillatory convective Taylor-Couette flows of second-grade fluids subject to Lorentz and Darcy-Forchheimer quadratic drag forces. Int Comm Heat Tran2021; 126: 105395.
53.
WakifAAnimasaunILKhanU, et al.Dynamics of radiative-reactive Walters-b fluid due to mixed convection conveying gyrotactic microorganisms, tiny particles experience haphazard motion, thermo-migration, and Lorentz force. Physica Scripta2021; 96: 125239.
54.
AlghamdiMWakifAThummaT, et al.Significance of variability in magnetic field strength and heat source on the radiative-convective motion of sodium alginate-based nanofluid within a Darcy-Brinkman porous structure bounded vertically by an irregular slender surface. Case Stud Therm Eng2021; 28: 101428.
55.
WakifAZaydanMAlshomraniAM, et al.New insights into the dynamics of alumina-(60% ethylene glycol + 40% water) over an isothermal stretching sheet using a renovated Buongiorno's approach: A numerical GDQLLM analysis. Int Comm Heat Tran2022; 133: 105937.
56.
AshrafMUQasimMWakifA, et al.A generalized differential quadrature algorithm for simulating magnetohydrodynamic peristaltic flow of blood-based nanofluid containing magnetite nanoparticles: a physiological application. Numer Methods Partial Differential Equation2022; 38: 666–692.
57.
ZaydanMHamadNHWakifA, et al.Generalized differential quadrature analysis of electro-magneto-hydrodynamic dissipative flows over a heated Riga plate in the presence of a space-dependent heat source: The case for strong suction effect. Heat Transfer2022; 5: 2063–2078.
58.
MankariousRARadwanMA. Shear Thickening Fluids Comparative Analysis Composed of Silica Nanoparticles in Polyethylene Glycol and Starch in Water. J Nanotechnology2020: 8839185.
