In this study, a two-dimensional computational model describing the rise and development of thin liquid water film on a rotating drum is presented. The liquid water flow is predicted by solving the Navier–Stoke equation using computational fluid dynamics neglecting the end effects of the rotating drum side wall along width. The liquid film on a half-submerged rotating drum was modeled by volume of fluid to determine the thickness and quality of the liquid film on a rotating drum. Computational results show that the liquid film on the rising side is smooth, whereas the film on the plunging point is complex. For a 300 r/min of 75 mm rotating drum, it takes ∼300 ms to develop the film from the rising point to fall to the plunging point. Air is entrained in plunging side by the falling film from the rising side.
JinZChenDYinLet al.
Molten waste plastic pyrolysis in a vertical falling film reactor and the influence of temperature on the pyrolysis products. Chin J Chem Eng2018;
26: 400–406. Available at: https://doi.org/10.1016/j.cjche.2017.08.001
2.
ZhangYJiaMYiPet al.
An efficient liquid film vaporization model for multi-component fuels considering thermal and mass diffusions. Appl Therm Eng2017;
112: 534–548. DOI: 10.1016/j.applthermaleng.2016.10.046
3.
SaeidNHHasanNAliMHBHM.Effect of the metallic foam heat sink shape on the mixed convection jet impingement cooling of a horizontal surface. J Porous Media2018;
21: 295–309. DOI: 10.1615/JPorMedia.v21.i4.10
4.
NaserJAlamFKhanM.Evaluation of a proposed dust ventilation/collection system in an underground mine crushing plant, Paper presented at the 16th Australasian Fluid Mechanics Conference, 16AFMC, Gold Coast, QLD, 2007.
5.
WittPKhanMNHBrooksG.CFD modelling of heat transfer in supersonic nozzles for magnesium production, Paper presented at the 136th TMS Annual Meeting, 2007, Orlando, FL, 2007.
6.
KhanMNHWittPJBrooksGAet al. Design of supersonic nozzles for ultra-rapid quenching of metallic vapours. In: 136th TMS Annual Meeting, Orlando, FL, 2007, pp. 699–709.
7.
YangSZhangLLuoKet al.
DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum. Powder Technol2018;
330: 93–104. Available at: https://doi.org/10.1016/j.powtec.2018.02.021
8.
NguyenDMKImaiTDangTLTet al.
Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquidfilm-forming device. J Environ Sci2018;
65: 116–126. Available at: https://doi.org/10.1016/j.jes.2017.03.026
GaoHLuoXCuiDet al.
A study of film thickness and hydrodynamic entrance length in liquid laminar film flow along a vertical tube. AIChE J2018;
64: 2078–2088. DOI: 10.1002/aic.16081
11.
RashidHHasanNNorMIM.Temperature peak analysis and its effect on absorption column for CO2capture process at different operating conditions. Chem Prod Process Model2014;
9: 105–115. DOI: 10.1515/cppm-2013-0044
12.
RashidHHasanNNorMIM.Accurate modeling of evaporation and enthalpy of vapor phase in CO2absorption by amine based solution. Sep Sci Technol (Philadelphia)2014;
49: 1326–1334. DOI: 10.1080/01496395.2014.882358
13.
KhanMNHFletcherCEvansGet al.CFD analysis of the mixing zone for a submerged jet system, Paper presented at the 2001 ASME Fluids Engineering Division Summer Meeting, New Orleans, LA, 2003.
14.
KhanMNHFletcherCEvansGet al.CFD modeling of free surface and entrainment of buoyant particles from free surface for sumberged jet systems, Paper presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, 2001.
15.
CampanellaOHCerroRL.Viscous flow on the outside of a horizontal rotating cylinder: the roll coating regime with a single fluid. Chem Eng Sci1984;
39: 1443–1449.
16.
DuffyBRWilsonSK.Thin-film and curtain flows on the outside of a rotating horizontal cylinder. J Fluid Mech1999;
394: 29–49.
17.
MoffattHK.Behaviour of a viscous film on the outer surface of a rotating cylinder. J Mech1977;
16: 651–673.
18.
EvansPLSchwartzLWRoyRV.Steady and unsteady solutions for coating flow on a rotating horizontal cylinder: two-dimensional theoretical and numerical modeling. Phys Fluids2004;
16: 2742–2756.
19.
EvansPLSchwartzLWRoyRV.Three-dimensional solutions for coating flow on a rotating horizontal cylinder: theory and experiment. Phys Fluids2005;
17: 072102/1–072102/20.
20.
HirtCWNicholsBD.Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys1981;
39: 201–225.
21.
VersteegHKMalalasekeraW.An introduction to computational fluid dynamics: the finite volume method. Prentice Hall, USA, 1996.
22.
WilsonSKHuntRDuffyBR.The rate of spreading in spin coating. J Fluid Mech2000;
413: 65–88.
23.
ShihTHLiouWWShabbirAet al.
A new k-epsilon eddy viscosity model for high Reynolds number turbulent flows. Comput Fluids1995;
24: 227–238.
24.
KhanMNHWittPBrooksGet al.Design of supersonic nozzles for ultra-rapid quenching of metallic vapours, 2006.
25.
HinzeJO.Turbulence. New York: McGraw-Hill Publishing Co., 1975.
26.
RoachePJ.Verification and validation in computational science and engineering. Hermosa Publishers, 1998.
27.
HasanNNaserJ.Determining the thickness of liquid film in laminar condition on a rotating drum surface using CFD. Chem Eng Sci2009;
64: 919–924.
28.
ZhalehrajabiERahmanianNHasanN.Effects of mesh grid and turbulence models on heat transfer coefficient in a convergent–divergent nozzle. Asia-Pac J Chem Eng2014;
9: 265–271.
29.
BurleyRJollyRPS.Entrainment of air into liquids by a high speed continuous solid surface. Chem Eng Sci1984;
39: 1357–1372.
30.
WilkinsonWL.Entrainment of air by a solid surface entering a liquid/air interface. Chem Eng Sci1975;
30: 1227–1230.
