The correlation between the lower temperature melting plateau endotherm and the stretching-induced pore formation in annealed polypropylene films

Abstract

The room temperature stretching process of annealed polypropylene hard elastomer films was analyzed and the relationship between the low-temperature endotherm plateau in the differential scanning calorimetry curves generated during annealing and the stretching-induced pore formation was studied. It was found that compared with that of precursor film, an endotherm plateau and some diffraction phenomena around 2θ angles of 13.0 degrees and 18.4 degrees were observed after annealing. During stretching, the plateau disappeared progressively and these diffraction phenomena also vanished. At the same time, the pores and bridges connecting lamellae were formed. The endotherm plateau came from the crystallization of tie chains around initial row-nucleated lamellar structures. During pore creation stage, the grown crystals were first drawn and converted to bridges connecting lamellae. Further stretching into the strain-hardening stage led to the deformation of the row-nucleated lamellar structures. The experimental results indicated that there was a direct relationship between the endotherm plateau and pore formation during the fabrication of microporous membrane based on melt stretching mechanism.

Keywords

annealing stretching polypropylene hard elastomer melt stretching mechanism microporous membrane

Get full access to this article

View all access options for this article.

References

Tabatabaei

Ajji

. Effect of initial crystalline morphology on properties of polypropylene cast films. J Plast Film Sheet 2011; 27(3): 223–233.

Sadeghi

. Developing of microporous polypropylene by stretching. PhD Thesis, Ecole Polytechnique de Montreal, Canada, 2007.

Johnson

. Investigations of the processing-structure–property relationship of selected semi-crystalline polymers. PhD Thesis, Virginia Polytechnic Institute and State University, United States, 2000.

Wilkes

. Orientation determination and morphological study of high density polyethylene (HDPE) extruded tubular films: effect of processing variables and molecular weight distribution. Polymer 1996; 37(21): 4675–4687.

Sadeghi

Ajji

Carreau

. Study of polypropylene morphology to obtain porous membranes by stretching. Proc. SPE ANTEC 2005; 1: 163–167.

Sadeghi

Ajji

Carreau

. Analysis of microporous membranes obtained from polypropylene films by stretching. J Membr Sci 2007; 292(1–2): 62–71.

Sadeghi

Ajji

Carreau

. Study of polypropylene morphology obtained from blown and cast film processes: initial morphology requirement for making porous membrane by stretching. J Plast Film Sheet 2005; 21(3): 199–216.

Sadeghi

Ajji

Carreau

. Analysis of row nucleated lamellar morphology of polypropylene obtained from the cast film process: effect of melt rheology and process conditions. Polym Eng Sci 2007; 47(7): 1170–1178.

Tabatabaei

Carreau

Ajji

. Microporous membranes obtained from polypropylene blend films by stretching. J Membr Sci 2008; 325(2): 772–782.

10.

Tabatabaei

Carreau

Ajji

. Effect of processing on the crystalline orientation, morphology and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer 2009; 50: 4228–4240.

11.

Tabatabaei

Carreau

Ajji

. Microporous membranes obtained from PP/HDPE multilayer films by stretching. J Membr Sci 2009; 345(1–2): 148–159.

12.

Sadeghi

Ajji

Carreau

. Microporous membranes obtained from polypropylene blends with superior permeability properties. J Polym Sci Polym Phys 2008; 46(2): 148–157.

13.

Kim

Park

. Effects of precursor properties on the preparation of polyethylene hollow fiber membranes by stretching. J Membr Sci 2008; 318(1–2): 201–209.

14.

Sang-Young Lee Soon-Yong Park Heon-Sik Song . Lamellar crystalline structure of hard elastic HDPE films and its influence on microporous membrane formation. Polymer 2006; 47(10): 3540–3547.

15.

Degroot

Doughty

Stewart

. Effects of cast film fabrication variables on structure development and key stretch film properties. J Appl Polym Sci 1994; 52(3): 365–376.

16.

Nogales

Hsiao

Somani

. Shear-induced crystallization of isotactic polypropylene with different molecular weight distribution: in situ small- and wide-angle X-ray scattering studies. Polymer 2001; 42(12): 5247–5256.

17.

Ferrer-Balas

Maspoch

Martinez

. Influence of annealing on the microstructural, tensile and fracture properties of polypropylene films. Polymer 2001; 42: 1697–1705.

18.

Duske Dudic Dusan Kostoski Vladimir Djokovic . Formation and behavior of low-temperature melting peak of quenched and annealed isotactic polypropylene. Polym Int 2002; 51(2): 111–116.

19.

Feng

Keum

Chen

. The role of interlamellar chain entanglement in deformation-induced structure changes during uniaxial stretching of isotactic polypropylene. Polymer 2007; 48(27): 6867–6880.

20.

Seguela

Staniek

Escaig

. Plastic deformation of polypropylene in relation to crystalline structure. J Appl Polym Sci 1999; 71(11): 1873–1885.

21.

Guinier

Fournet

. Small-angle scattering of X-rays. New York: Wiley, 1955.

22.

Noether

Whitney

. X-ray diffraction and morphology of crystalline ‘hard’ elastic materials. Polymer 1973; 2(11): 991–998.

23.

Hosemann

Caokovic

. Adhasive reibungse alastizitat von hard elastischem polypropylene (HEPP). Coll Polym Sci 1981; 259(1): 15–21.