Polyamide 6, polyamide 12, polybutyleneterephthalate, and polyetherimide films are
plasma treated in an APGD unit using various applied voltages, gas flow rates,
frequencies, and dwell times. The results show changes in the surface chemistry
(FTIR); the degree of change in dynamic contact angle is found to be dependent on
the polymer type, dwell time, and electrical characteristics of the plasma.
Dai, X.J.
and
Klitz, L.
(2001).
Study of Atmospheric and Low Pressure Plasma Modification in the Surface
Properties of Natural Fibres
, Textile Industry 81st World Conference,
Melbourne, Australia.
2.
Hollander, A.
and
Behnisch, J.
(2001).
Low Pressure Plasma Treatments Inside a Closed Package
, Surface and Coatings Technology,
142–144:
1074–1077
.
3.
Ryntz, R.A.
(1994).
Coating Adhesion to Low Surface Free Energy Substrates
, Process in Organic Coatings, 25(1):
73–83
.
4.
Nersisyan, G.
and
Graham, W.G.
(2004).
Characterisation of a Dielectric Barrier Discharge Operating in an Open
Reactor with Flowing Helium
, Plasma Sources Science and Technology, 13:
582–587
.
5.
Davies, J.
,
Nunnerley, C.S.
,
Brisley, A.C.
,
Sunderland, R.F.
,
Edwards, J.C.
,
Krügerb, P.
,
Knes, R.
,
Paul, A.J.
and
Hibbert, S.
(2000).
Argon Plasma Treatment of Polystyrene Microtiter Wells. Chemical and
Physical Characterisation by Contact Angle
, ToF-SIMS, XPS and STM, Colloids and Surfaces A: Physiochemical and
Engineering Aspects, 174(3):
287–295
.
