Sage Journals: Discover world-class research

Abstract

The development of Advanced SCLAIRTECH TM2 dual reactor technology and a proprietary single-site catalyst by NOVA Chemicals Corporation provides unique opportunities for resin design. This results in single-site linear low-density polyethylene (sLLDPE) products with a unique set of properties. For blends of these sLLDPE with low density polyethylene (LDPE), several benefits arise. The melt strength is enhanced easily, which benefits maximum output on blown film lines. The equivalent crystallization temperatures of sLLDPE and LDPE are beneficial for processability and physical properties. Adding as little as 5% LDPE to sLLDPE results in a 50% increase in maximum output, while maintaining a high film performance.

Keywords

blown film single-site catalyst dual reactor solution process LLDPE LDPE blends melt strength bubble stability maximum output physical properties tear MD puncture

Get full access to this article

View all access options for this article.

References

Tas, P. , Nguyen, L. , Marshall, S. and Kashanian, M. (2004). Bubble Stability and Maximum Output of SURPASS sLLDPE Resin in Blown Film , In: Tappi PLACE Conference Proceedings, Indiana, IN, USA, August 29–September 2, 2004, CD.

Ghijssels, A. , Ente, J.J.S.M. and Raadsen, J. (1990). Melt Strength Behavior of PE and its Relation to Bubble Stability in Film Blowing, Intern . Polym. Process., V(4): 284-284 .

Ho, K. , Kale, L. and Montgomery, S. (2002). Melt Strength of Linear Low-Density Polyethylene/Low-Density Polyethylene Blends , J. Appl. Polym. Sci., 85: 1408-1408 .

Ajji, A. , Sammut, P. and Huneault, M.A. (2003). Elongational Rheology of LLDPE/LDPE Blends , J. Appl. Polym. Sci., 88(14): 3070-3070 .

Butler, T. (2000). Blown Film Bubble Instability Induced by Fabrication Conditions, In : SPE Antec Proceedings, Orlando, FL, USA, May 7–11, p. 156-156 .

Kanai, T. and White, J. (1984). Kinematics, Dynamics and Stability of the Tubular Film Extrusion of Various Polyethylenes , Polym. Eng. Sci., 24(15): 1185-1185 .

White, J.L. and Yamane, H. (1987). A Collaborative Study of the Stability of Extrusion, Melt Spinning and Tubular Film Extrusion of Some High-, Lowand Linear-Low Density Polyethylene Samples , Pure & Applied Chem., 59(2): 193-193 .

Ghaneh-Fard, A. , Carreau, P.J. and Lafleur, P.G. (1996). Study of Instabilities in Film Blowing , AIChE J., 42(5): 1388-1388 .

Kim, S. , Fang, Y. , Lafleur, P.G. and Carreau, P.J. (2003). Dynamics and Criteria for Bubble Instabilities in a Single Layer Film Blowing Extrusion, In : SPE Antec Tech. Paper, Nashville, TN, USA, May 4–8, 2003, p. 3246-3246 .

10.

Field, G. , Mimic, P. and Bhattacharya, S. (1999). Melt Strength and Film Bubble Instability of LLDPE/LDPE Blends , Polymer International, 48: 461-461 .

11.

Lu, J. and Sue, H.J. (2002). Morphology and Mechanical Properties of Blown Films of a Low Density Polyethylene/Linear Low Density Polyethylene Blend , J. Polymer Science – Part B: Polymer Physics, 40(6): 507-507 .

12.

Zhang, X.M. , Elkoun, S. , Ajji, A. and Huneault, M.A. (2004). Effect of Crystalline Structure on Tear Resistance of LDPE and LLDPE Blown Films , J. Plastic Film & Sheeting, 20(1): 43-43 .

13.

Tas, P. , Marshall, S. and Swabey, T. (2005). Processability and Film Performance of Single Site sLLDPE/LDPE Blends , In: Tappi European PLACE Conference Proceedings, Vienna, Austria, May 23–25, 2005, CD.

Melt Strength,Maximum Output,and Physical Properties of SURPASS TM1 sLLDPE–LDPE Blends in Blown Film

Abstract

Keywords

Get full access to this article

References