The evolutions of the strain-induced crystalline phase of poly(ethylene
terephthalate) (PET), poly(m-xylene adipamide) (MXD6), and
PET–MXD6–ionomer blend films are investigated by differential
scanning calorimetry, X-ray diffraction, and birefringence measurements. Initially
wholly amorphous, the films are uniaxially hot-drawn above the glass transition
temperature Tg. During drawing and depending on the draw ratio, an
induced crystalline phase appears in the three materials. The comparison of the
degree of crystallinity shows that the maximum degree of crystallinity is close to
40% for the three materials and the DSC analysis shows a similar thermal behavior
between PET, MXD6, and blend samples. The critical draw ratios for the crystalline
phase appearance are equal to 2, 3, and 3 for PET, MXD6, and blend, respectively.
Patcheak, T.D.
and
Jabarin, S.A.
(2001).
Structure and Morphology of PET/PEN Blends
, Polymer, 42(21):
8975–8985
.
2.
Mitsubishi Gas Chemical Co., Inc. N-MXD6 as a Barrier Material for Films,
N-MXD6 Technical Information for Film Application, MF-01E.
3.
Mitsubishi Gas Chemical Co., Inc. N-MXD6 as a Barrier Material for PET
Bottles, Technical Information for PET Bottle Applications, MB-01E.
4.
Samios, C.K.
and
Kalfoglou, N.K.
(1999).
Compatibilization of Poly(ethylene terephtalate)/Polyamide-6 Alloys:
Mechanical, Thermal and Morphological Characterization
, Polymer, 40(17):
4811–4819
.
5.
Huang, C.C.
and
Chang, F.C.
(1997).
Reactive Compatibilization of Polymer Blends of Poly(butylene terephtalate)
and Polyamide 6,6: 2. Morphological and Mechanical Properties
, Polymer, 38(17):
4287–4293
.
6.
Evstatiev, M.
,
Schultz, J.M.
,
Petrovich, S.
,
Georgiev, G.
,
Fakirov, S.
and
Friedrich, K.
(1998).
In situ Polymer/Polymer Composites from Poly (ethylene terephtalate),
Polyamide-6, and Polyamide-66 Blends
, J. Appl. Polym. Sci., 67(4):
723–737
.
7.
Liu, R.Y.F.
,
Hiltner, A.
and
Baer, E.
(2004).
Free Volume and Oxygen Transport in Cold-drawn Polyesters
, J. Polym. Sci. Part B: Polym. Phys.,
42(3):
493–504
.
8.
Kawakami, D.
,
Hsiao, B.S.
,
Ran, S.
,
Burger, C.
,
Fu, B.
,
Sics, I.
,
Chu, B.
and
Kikutani, T.
(2004).
Structural Formation of Amorphous Poly(ethylene terephtalate) during
Uniaxial Deformation above Glass Temperature
, Polymer, 45(3):
905–918
.
9.
Lu, X.F.
and
Hay, J.N.
(2001).
Crystallization Orientation and Relaxation in Uniaxially Drawn
Poly(ethylene terephtalate)
, Polymer, 42(19):
8055–8067
.
10.
Zumailan, A.
,
Dargent, E.
and
Saiter, J.M.
(2004).
Characterization of Polyethylene Terephthalate Films Drawn in Hot Water
, Polym. Eng. Sci., 44(2):
223–230
.
11.
Dargent, E.
,
Grenet, J.
and
Auvray, X.
(1994).
Thermal Behaviour of Drawn Semi-crystalline Poly(ethylene terephthalate) Films
, J. Therm. Anal., 41:
1409–1415
.
12.
Dargent, E.
,
Denis, A.
,
Galland, C.
and
Grenet, J.
(1996).
Non-isothermal Crystallization Kinetics of Hot Drawn Polyester Films:
Kissinger and Ozawa Analysis
, J. Therm. Anal., 46:
377–385
.
13.
Dargent, E.
,
Denis, G.
,
Caron, C.
,
Saiter, J.M.
and
Grenet, J.
(2000).
Effect of Water Molecules on Crystallization during Uniaxial Drawing of
Poly(ethylene terephthalate) Films
, J. Appl. Polym. Sci., 77(5):
1056–1066
.
14.
Dargent, E.
,
Grenet, J.
and
Dahoun, A.
(1997).
Evolution of Hot Strain Induced Crystalline Texture of Poly(ethylene
terephthalate) Films
, Polym. Eng. Sci., 37(11):
1853–1857
.
15.
Kattan, M.
,
Dargent, E.
and
Grenet, J.
(2002).
Three Phase Model in Drawn Thermoplastic Polyesters: Comparaison of
Differential Scanning Calorimetry and Thermally Stimulated Depolarisation
Current Experiments
, Polymer, 43(4):
1399–1405
.
Kalfoglou, N.K.
and
Skafidas, D.S.
(1994).
Compatibility of Blends of Poly(ethylene terephthalate) with the Ionomer of
Ethylene-Methacrylic Acid Copolymer
, Eur. Polym. J., 30(8):
933–939
.
18.
Wilis, J.M.
and
Favis, B.D.
(1988).
Processing-morphology Relationships of Compatibilized Polyolefin/Polyamide
Blends. Part I: The Effect of an Ionomer Compatibilizer on Blend Morphology
, Polym. Eng. Sci., 28(21):
1416–1426
.
19.
Molnar, A.
and
Eisenberg, A.
(1992).
Miscibility of Polyamide-6 with Lithium or Sodium Sulfonated Polystyrene Ionomers
, Macromolecules, 25(21):
5774–5782
.
20.
Hay, I.L.
(1980). In:
Fava, R.A.
(ed.), Methods of Experimental Physics, Vol. 16, Part C, p.
163–163,
Academic Press, New York
.
21.
Persyn, O.
,
Miri, V.
,
Lefebvre, J.M.
,
Depecker, C.
,
Gors, C.
and
Stroeks, A.
(2004).
Structural Organization and Drawability in Polyamide Blends
, Polym. Eng. Sci., 44(2):
261–271
.
22.
Oultache, A.K.
,
Kong, X.
,
Pellerin, C.
,
Brisson, J.
,
Pézolet, M.
and
Prud'homme, R.E.
(2001).
Orientation and Relaxation of Orientation of Amorphous Poly(ethylene terephthalate)
, Polymer, 42(21):
9051–9058
.
23.
Cakmak, M.
(2004). Polymer Films and Fibers Symposium,
Montréal, Canada
, Sept. 25–27.
24.
Wunderlich, B.
(1980). Macromolecular Physics, Vol. 3,
Academic Press, New York
.
25.
Ben Doudou, B.
,
Dargent, E.
,
Marais, S.
,
Grenet, J.
and
Hirata Y.Barrier Properties and Microstructure Modifications Induced by Liquid Water
for a Semi-aromatic Polyamide, J. Polym. Sci. Part B: Polym.
Phys. (in press).
