Mechanical,Physical,and Barrier Properties of Poly(Lactide) Films

Abstract

High molecular mass poly(lactide), (PLA), is an attractive polymer family because in addition to being thermoplastic, biodegradable, compostable, and produced from annually renewable resources, it shows mechanical and barrier behavior comparable to synthetic polymers like polystyrene (PS) and polyethylene terephthalate (PET). Furthermore, technology for large-scale fabrication of PLA has been fully developed. However, there is still a need to better understand the properties of PLA as this polymer is adapted to packaging applications, especially for food packaging. In this work, films from two PLA resins were studied by tensile testing; differential scanning calorimetry (DSC); and permeation of carbon dioxide, oxygen, and water vapor. The data from these two PLA film samples are compared to those of PS and PET.

Keywords

poly(lactide) polymers PLA PET PS WVTR O2 permeability CO2 permeability mechanical properties DSC crystallinity

Get full access to this article

View all access options for this article.

References

1. Drumright, R.E. , Patrick, R.G. and Henton, D.E. (2000). Polylactic Acid Technology, Advanced Materials, 12(23): 1841-1846.

2. Hartmann, M.H. (1998). High Molecular Weight Polylactic Acid Polymers, In: Kaplan, D.L. (ed.), Biopolymers from Renewable Resources, pp. 367-411, Springer, New York.

3. Witzke, D.R. (1997). Introduction to Properties, Engineering, and Prospects of Polylactide Polymers, pp. 32-72, PhD Thesis, Dept. of Chemical Engineering, Michigan State University, East Lansing, Michigan.

4. Kharas, G.B. , Sanchez-Riera, F. and Severson, D.K. (1994). Polymers of Lactic Acid, In: Mobley, D.P. (ed.), Plastics from Microbes, pp. 92-238, Hanser Publishers, New York.

5. Anonymous (1987). Guide to Plastics, In: (ed) Modern Plastics Encyclopedia, p. 92, McGraw Hill, New York.

6. Micard, V.G. (2000). Thermal Behavior of Native and Hydrophobized Wheat Gluten, Gliadin, and Gluten-rich Fractions by Modulated DSC, International Journal of Biological Macromolecules, 27: 229-236.

7. Fisher, E.W. , Sterzel, H.J. , Wegner, G. Investigation of the Structure of Solution Growth Crystals of Lactide Copolymers by Means of Chemical Reactions. Kolloid-Z.U.Z. Polymere, 1973. 251: 980-990.

8. Pauly, S. (1999). Permeability and Diffusion Data, In: Brandup, E. H. and Grulke, E. A. (eds), Polymer Handbook, p. 547, John Wiley & Sons Inc., New York.

9. Taylor, John R. (1982). An Introduction to Error Analysis, The Study of Uncertainties in Physical Measurements, p. 57, Universal Science Book, Mill Valley, California.

10.

10. Shogren, R. (1997). Water Vapor Permeability of Biodegradable Polymers, Journal of Environmental Polymer Degradation, 5(2): 91-95.