Abstract
During encircling scleral buckle placement, the ends of the element are tightened to achieve a shortened radius of the eye. The determining factor of the final buckle height is subjective using usually a combination of the buckle height visualized with the degree of scleral indentation and can be difficult to be taught early on to trainees. Here, we describe a case series in which a modified controlled encircling scleral buckle technique that simplifies and standardizes the achievement of reproducible buckle height of about a 1 mm is objective and easy to be taught. This novel encircling scleral buckling technique successfully achieves a good postoperative scleral buckle height in a reproducible and standardized fashion using objective measurements and it is easier to be taught to trainees.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
